13.106 Envelope & Mechanical Acceptance Forms

The Certificate of Acceptance forms are used to document the completion of these procedures. Each form includes a series of check boxes relating to each test or verification that needs to be performed. When completing the forms, check the appropriate box on the form after each test or verification is completed. Where the form includes data entry locations other than check boxes, enter the data requested on the form. These forms are located in Appendix A:

Envelope

      NRCA-ENV-02-F - Fenestration Acceptance

 

Mechanical

      NRCA-MCH-02-A - Outdoor Air Acceptance

      NRCA-MCH-03-A - Constant  Volume Single Zone Unitary Air Conditioner and Heat Pump Systems

      NRCA-MCH-04-A - Air Distribution Systems Acceptance

      NRCA-MCH-05-A - Air Economizer Controls Acceptance

      NRCA-MCH-06-A - Demand Control Ventilation Systems Acceptance

      NRCA-MCH-07-A - Supply Fan VFD Acceptance

      NRCA-MCH-08-A - Valve Leakage Test

      NRCA-MCH-09-A - Supply Water Temperature Reset Controls Acceptance

      NRCA-MCH-10-A - Hydronic System Variable Flow Control Acceptance

      NRCA-MCH-11-A - Automatic Demand Shed Control Acceptance

      NRCA-MCH-12-A - Fault Detection & Diagnostics (FDD) for Packaged Direct-Expansion Units

      NRCA-MCH-13-A - Automatic Fault Detection & Diagnostics (FDD) for Air Handling Units and Zone Terminal Units Acceptance

      NRCA-MCH-14-A - Distributed Energy Storage DX AC Systems Acceptance

      NRCA-MCH-15-A - Thermal Energy Storage (TES) System Acceptance

      NRCA-MCH-16-A - Supply Air Temperature Reset Controls Acceptance

      NRCA-MCH-17-A - Condenser Water Supply Temperature Reset Controls Acceptance

      NRCA-MCH-18-A - Energy Management Control System Acceptance