Section 1606. Filing by Manufacturers; Listing of Appliances in Database.

(a) Filing of Statements.

Text

Description automatically generated with medium confidence

Each manufacturer shall file electronically file with the Executive Director through the MAEDbS a statement for each appliance that is sold or offered for sale in California. The statement shall contain all of the information described in paragraphs (2) through (4) of this subsection and shall meet all of the requirements of paragraph (1) of this subsection and all other applicable requirements in this Article.

The effective dates of this section shall be the same as the effective dates shown in Section 1605.1, 1605.2 or Section 1605.3 of this Article For appliances for which there is an energy efficiency, energy consumption, energy design, water efficiency, water consumption, or water design standard in Section 1605.1, 1605.2, or Section 1605.3 of this Article

For appliances with no energy efficiency, energy consumption, energy design, water efficiency, water consumption, or water design standard in Section 1605.1, 1605.2, or Section 1605.3, of this Article the effective date of this section shall be one year after they are added to Section 1601 of this Article, unless a different effective date is specified.

 

Exceptions to Section 1606(a) of this Article: Section 1606(a). is not applicable to:

(1)  external power supplies,

(2)  small electric motors, or

(3)  à la carte chargers meeting the EXCEPTION noted in Section 1605.3(w)(2) of this Article.

(4)  General service lamps

 

(1)     General Rules.

(A)           Format and Categories. Each statement shall be in a format (including but not limited to computer formats) and in categories specified by the Executive Director.

(B)             When Different Statements are Required. The Executive Director may establish, modify, and enforce schedules for the submittal of statements where it is reasonably necessary for orderly processing of submittals, for example when manufacturers or third parties often submit many statements simultaneously.

(C)           Asterisks in Model Numbers. In filing any statement, the manufacturer may use asterisks as a substitute for letters, numbers, blanks, or other characters in the model number, provided that an asterisk (i) shall be used only for a part of the model number that does not indicate energy consumption, energy efficiency, water consumption, or water efficiency, or a design or feature affecting such efficiency or consumption; (ii) shall represent a single letter, number, blank, or other character at the asteriskʹs location in the model number; and (iii) shall not be used for any of the first four letters, numbers, blanks, or other characters in the model number.

(D)           Different Functions. Except as provided in Section 1606(a)(1)(G), if the same appliance is sold or offered for sale as more than one type of appliance shown in Table X (for example, if the appliance can serve both water heating and pool heating functions), the manufacturer shall submit a separate statement for each appliance type. Each appliance type for which a statement is submitted must match all the common identifiers shown in Table X.

(E) Multiple Statements. A manufacturer may electronically file statements through the MAEDbS for more than one appliance in a single submittal to the Executive Director. If a submittal contains statements for more than one appliance, there shall be only one statement for each appliance, except as provided in Sections 1606(a)(1)(D) and 1606(a)(1)(G). The Executive Director shall allow multiple statements to be submitted on the same sheet of paper or in the same electronic file under conditions she or he determines are reasonably necessary to ensure accuracy and compatibility with the MAEDbS

(F) Split System Central Air Conditioners. The statement for split system air conditioners shall be for the combination of the compressorcontaining unit and the noncompressorcontaining unit tested under section 1604(c) of this Article.

(G)  Combination SpaceHeating and WaterHeating Appliances. Manufacturers of combination spaceheating and waterheating appliances shall file two statements for each such appliance. The first statement shall contain the information listed in Table X for combination spaceheating and waterheating appliances, and all other information shown in Table X for “all appliances;” and the second statement shall contain the information listed in Table X for the primary function of the appliance according to the determination required by Sections 1605(e) and 1605(f), and containing all other information shown in Table X for “all appliances.” Each appliance type for which a statement is submitted must match all the common identifiers shown in Table X.

(H) Portable Air Conditioners. A manufacturer shall file two statements for a single model of portable air conditioner if the model is sold or offered for sale in California with both single-duct and dual-duct configuration options. One statement shall be for the single-duct configuration, and the other statement shall be for the dual-duct configuration

 

(2)   Manufacturer Information.

(A)  The name, address, telephone number, and, if available, fax number, URL (web site) address, and email address of the manufacturer; provided, however, that if a parent entity is filing on behalf of a subsidiary entity, if a subsidiary entity is filing on behalf of a parent entity, or if an affiliate entity is filing on behalf of an affiliate entity, then each entity shall be clearly identified and the information shall be provided for both entities.

(B)  The name, address, telephone number, and, if available, fax number and email address of the individual to contact concerning the statement pursuant to Section 1606(a)(4). There shall be only one individual to contact for each category (box) in the “Appliance” column of Table X, except that the individual may, during his or her absence, delegate his or her duties in this regard.

(C)  The name, address, telephone number, and, if available, fax number and email address of the person signing the declaration pursuant to Section 1606(a)(4)

 

(3)   Testing and Performance Information.

(A)  A statement that the appliance has been tested in accordance with all applicable requirements of Sections 1603 and 1604. If Section 1604 provides more than one test method that may be used, the manufacturer shall identify which method was used.

 

EXCEPTION 1. to Section 1606(a)(3)(A) of this Article:

For state-regulated compressors, the manufacturer shall submit a statement that the appliance has been tested in accordance with all applicable requirements of sections 1603 and 1604 of this Article, or that the appliance has been rated according to an alternative efficiency determination method (AEDM) in accordance with all applicable requirements of section 1604(s) of this Article.

 

EXCEPTION 2. to Section 1606(a)(3)(A) of this Article:

For integral cartridge-filter pool pumps and integral sand-filter pool pumps manufactured on or after July 19, 2021, in lieu of the statement required in section 1606(a)(3)(A) of this Article, a statement that the appliance meets the energy design requirements of sections 1605.1(g)(7)(C) and 1605.1(g)(7)(D) of this Article.

 

EXCEPTION 3 to section 1606(a)(3)(A) of this Article:

For residential pool pump and motor combinations and residential replacement pool pump motors, in lieu of the statement required in section 1606(a)(3)(A) of this Article, a statement that the appliance meets the design requirements of section 1605.3(g)(5)(A) and 1605.3(g)(5)(B) of this Article.

 

(B)  The name and address and, if available, telephone number, fax number, URL (web site) address, and email address of the laboratory or other institution where the testing required by Sections 1603 and 1604 was performed.

(C)  The applicable information listed in Table X; provided, however, that submittal of information marked with ʺ1ʺ is voluntary for federally regulated appliances. Where there is text in the ʺPermissible Answersʺ column states “other (specify),” the information provided must be a specific response for the “Required Information” category (e.g., a response of “other” is not acceptable).

 

Exception 1. to Section 1606(a)(3)(C):

If an appliance has an alternative test procedure pursuant to  section 1603(c)(1) of this Article, or an alternative assessment method specified pursuant to Section 1603(c)(2)(A) of this Article, then the statement shall include:

(1) the following information from Table X: Manufacturer's Name, Brand Name, Model Number, and Regulatory Status; and

(2) all information from Table X that is applicable to the appliance and that is produced during the alternative test procedure or the alternative assessment method; and

(3) all other energy performance information produced during the alternative test procedure or the alternative assessment method.

 

Exception 2. to Section 1606(a)(3)(C):

If the Executive Director has specified that there is no test method for an appliance pursuant to section 1603(c)(2)(B) of this Article, then the statement shall include the following information from Table X: Manufacturer's Name, Brand Name, Model Number, and Regulatory Status.

 

Exception 3. to Section 1606(a)(3)(C):

Manufacturers of state-regulated LED lamps and LED versions of state-regulated small-diameter directional lamps may certify estimated values for rated lifetime until testing per section 1604 is complete. When reporting estimated values, the certification report shall describe the prediction method, which must be generally representative of the methods specified in 10 C.F.R. Appendix BB to subpart B of part 430, “Uniform Test Method for Measuring the Input Power, Lumen Output, Lamp Efficacy, Correlated Color Temperature (CCT), Color Rendering Index (CRI), Power Factor, Time to Failure, and Standby Mode Power of Integrated Light-Emitting Diode (LED) Lamps.” Manufacturers shall maintain records of the development of all estimated values and any associated initial test data. Manufacturers shall update the certification in the MAEDbS upon completion of the required test procedures for rated lifetime.

(D)  How Tested Data Must Be Reported.

1.   For any numerical value required by Table X that is produced by a test specified in Section 1604, the reported value shall be no higher for the value for which the consumer would prefer a high number, and no lower for the value for which the consumer would prefer a low number, than the values obtained by testing; unless different specific instructions are specified in the test method specified in Section 1604.

2.   For any numerical value required by Table X that is produced by calculation from measured numerical test results, the reported value shall be no higher for the values where the consumer would prefer a high number than the exact result of the calculation, and no lower than the exact result of the calculation where the consumer would prefer a low number, than the values obtained by calculating, unless different specific instructions are specified in the test method specified in Section 1604 of this Article.

3.   Manufacturers may report:

a.   numbers higher than tested values, where the consumer would, all other things being equal, prefer lower values (or is indifferent); and

b.   numbers lower than tested values, where the consumer would, all other things being equal, prefer higher values (or is indifferent).

Example: An air conditioner is tested using the appropriate test method specified in Section 1604, and the test method does not include specific instructions about the precision of reporting.

     Cooling capacity is measured as: 36,014 Btu per hour.

     For cooling capacity, consumers prefer higher values.

     The manufacturer may not report any value over 36,014 Btu per hour.

     The manufacturer chooses to report 36,000 Btu per hour.

     Electrical energy use is measured at 3,487 watts.

     For electrical energy use, consumers prefer lower values.

     The manufacturer may not report any value under 3,487 watts.

     The manufacturer chooses to report 3,500 watts.

     Using the data the manufacturer chooses to report, EER = 36,000/3,500 = 10.285714.

     For EER, consumers prefer higher values.

     The manufacturer may not report any value of EER over 10.285714 (if EER is reported with only one decimal place, the maximum value would be 10.2).

     The manufacturer chooses to report EER = 10.2 Btu per watt hour.

     If the manufacturer had chosen to report the cooling capacity as 36,014 Btu per hour, and the electrical energy use as 3,487 watts, the calculated EER would have been 36,014/3,487 = 10.328076. In this case the manufacturer could not report any value of EER over 10.328076 (if EER is reported with only one decimal place, the maximum value would be 10.3).

 

Table X Data Submittal Requirements

 

A – Refrigerators, Refrigerator-Freezers, and Freezers

B - Room Air Conditioners, Room Air-Conditioning Heat Pumps, Packaged Terminal Air Conditioners, and Packaged Terminal Heat Pumps

C - Central Air Conditioners

D –Portable Air Conditioners, Evaporative Coolers, Ceiling Fans, Ceiling Fan Light Kits, Whole House Fans, Residential Exhaust Fans, Dehumidifiers and Residential Furnace Fans

E   Gas and Oil Space Heaters and Electric Residential Boilers

F - Water Heaters

G - Pool Heaters, Portable Electric Spas, Residential Pool Pump and Motor Combinations, and Replacement Residential Pool Pump Motors

H - Plumbing Fittings

I - Plumbing Fixtures

J - Fluorescent Lamp Ballasts and Deep-Dimming Lamp Ballasts

K - Lamps

L - Emergency Lighting

M - Traffic Signal Modules

N - Luminaires and Torchieres

O - Dishwashers

P - Clothes Washers

Q - Clothes Dryers

R - Cooking Products and Food Service Equipment

S - Electric Motors

T - Distribution Transformers

U – None.

V - Computers, Computer Monitors, Televisions, Signage Displays, and Consumer Audio and Video Equipment

W - Battery Charger Systems

X – Landscape Irrigation Equipment

 

Table X- A
Refrigerators, Refrigerator-Freezers, and Freezers.
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

NonCommercial Refrigerators, NonCommercial RefrigeratorFreezers, NonCommercial Freezers

 

*Product Class

Category in Table A-2 or A3 (specify)

Access1, 2

Door, drawer, both door and drawer

Kitchen Unit1, 2

True, False

Refrigerator Volume

 

 

Freezer Volume

 

 

Total Volume

 

Adjusted Total Volume

 

Height

 

Width

 

Depth

 

Annual Energy Consumption (low)

 

Annual Energy Consumption (high)

 

Annual Energy Consumption (mean)

 

Antisweat Heater Switch

True, False

Refrigerant Type1, 2

Ozonedepleting, nonozone depleting

Insulation Type1, 2

Ozonedepleting, nonozone depleting

Selfcontained Commercial Refrigerators with or without doors, Selfcontained Commercial Refrigerator Freezers with or without doors, Self contained Commercial Freezers with or without doors, Selfcontained Commercial Refrigerators specifically designed for display and sale of bottled or canned beverages with or without doors, Remote Condensing Commercial Refrigerators, Remote Condensing Commercial Freezers, Commercial Ice Cream Freezers

(Note: units with multiple compartments must certify data for each compartment)

 

*Cabinet Style

Ice cream cabinet; milk or beverage cabinet; milk, beverage, or ice cream cabinet; undercounter cabinet; other reachin cabinet; passthrough cabinet; rollin or rollthrough cabinet; preparation table; buffet table; wedge case; work top table.

*Defrost System

Automatic, manual, partialautomatic

*Type

Icecream application, lowtemperature application, mediumtemperature application, pulldown application

Total Compartments (for hybrid models and refrigerator-freezers)

 

Equipment Family

Vertical open, semivertical open, horizontal open, vertical closed transparent, horizontal closed transparent, vertical closed solid, horizontal closed solid, service over counter

Condensing Unit Configuration

Remote, selfcontained

Multiple Compartments Number Code

 

Total Display Area (

TDA)

 

 

Total Volume

 

Height

 

Width

 

Depth

 

Anticondensate Energy Consumption (AEC) (for hybrid models and refrigerator-freezers)

 

Condensate Evaporator Pan Energy Consumption (PEC) (for hybrid models and refrigerator-freezers)

 

Defrost Energy Consumption (DEC) (for hybrid models and refrigerator-freezers)

 

Fan Energy Consumption (FEC) (for hybrid models and refrigerator-freezers)

 

Compressor Energy Consumption (CEC) (for hybrid models and refrigerator-freezers)

 

Lighting Energy Consumption (LEC) (for hybrid models and refrigerator-freezers)

 

Other Energy Consumption (OEC) (for hybrid models and refrigerator-freezers)

 

Daily Energy Consumption

 

Calculated Daily Energy Consumption (

CDEC)

 

 

Total Daily Energy Consumption (TDEC)

 

 

Refrigerant Type

Ozonedepleting, nonozonedepleting

Insulation Type

Ozonedepleting, nonozonedepleting

Automatic Commercial Ice Makers

 

*Equipment Type

Icemaking head, remotecondensing, selfcontained, both remotecondensing and remotecompressor

*Cooling Type

Air, water

*Ice Maker Process Type

Batch, continuous, other (specify)

Harvest Rate

 

 

Energy Consumption

 

Water Consumption

 

Ice Hardness Adjustment Factor (for continuous type models)

 

Water Dispensers

 

 

*Type

Bottle type; Bottle type with compartment; Pressure type, bubbler; Pressure type with compartment, bubbler; Pressure type, faucet; Pressure type with compartment, faucet, PointofUse

*Condenser Cooling Medium

Aircooled; Watercooled

*Style

Freestanding; FlushtoWall; Wall Hung; Wall Hung semirecessed; Remote; Recessed

*Refrigerated Compartment

 

Temperatures delivered

Cold only, cook (ambient) and cold, hot and cold

Cooling Capacity (gallons/hour)

 

Heating Capacity (6oz. cup per hour)

 

Standby Energy Consumption (kWh/day)

 

Walkin Coolers, and Walkin Freezers: Doors

 

Door Type

Passage door (medium temperature), passage door (low temperature), freight door (medium temperature), freight door (low temperature), display door (medium temperature), display door (low temperature)

Door surface area (ft2)

 

Transparent reach-in?

Door, window, both

Glass Type of Doors and Door Windows (if applicable)

1” triple pane insulated, 1” triple pane tempered, 2-pane Low-E Gas Fill, 3-pane gas fill, 3-pane heat reflective, 3-pane Low-E gas fill, 3-pane reflective gas fill, 3-pane heated, 3- pane unheated, none

Anti-sweat heater power draw (W per ft2 of door opening) (if applicable)

 

Door insulation R-value (if applicable)

 

All applicable design standards incorporated?

True, False

Daily energy consumption (kWh/day)

 

Equipped with a timer, control system, or other demand-based control reducing lighting power and/or heater wire and/or other electricity-consuming device

Lighting, heater wire, other electricity-consuming device, lighting + heater wire, lighting + other electricity-consuming device, heater wire + other electricity-consuming device, all, none

Total rated lighting power (W) (if applicable)

c

Total rated heater wire power (W) (if applicable)

 

Total rated other electricity-consuming device power (W) (if applicable)

 

Walkin Coolers, and Walkin Freezers:Panels

Panel Type

Wall panels for walk-in coolers, ceiling panels for walk-in coolers, wall panels for walk-in freezers, ceiling panels for walk-in freezers, floor panels for walk-in freezers

R-value of wall insulation (if applicable)

 

R-value of ceiling insulation (if applicable)

 

R-value of floor insulation (if applicable)

 

Walkin Coolers, and Walkin Freezers: Refrigeration Systems

Refrigeration system Type

Dedicated condensing system medium temperature indoor; Dedicated condensing system medium temperature outdoor; Dedicated condensing system low temperature indoor; Dedicated condensing system low temperature outdoor; unit cooler medium temperature, unit cooler low temperature

Is outdoor dedicated condensing system also certified (for indoor dedicated condensing systems only?

True, False

Model number for outdoor dedicated condensing system (only applicable for indoor dedicated condensing systems where outdoor dedicated condensing system is also certified)

 

Refrigeration system net capacity (Btu/hr) (if applicable)

 

Evaporator fan motor horsepower (if applicable)

 

Condenser fan motor horsepower (if applicable)

 

All applicable design requirements incorporated?

True, False

Process cooling refrigeration system?

True, False

Annual Walk-in Energy Factor(AWEF)

 

Configuration tested for certification (if applicable)

Condensing unit only, unit cooler only, single package dedicated system, matched pair

Refrigerated

Bottled or Canned Beverage Vending Machines

 

 

Equipment Class (reporting of Combination A or Combination B for models manufactured on or after January 8, 2019)

Class A, Class B, Combination A,Combination B

Door Type

Glass front, closed front,

Machine use designation

Indoor, indoor / outdoor

Maximum Daily Energy Consumption at 75°F. Ambient Temperature

 

Standard Vendible Capacity

 

 

Low Power State – lighting

True, false

Low Power State – refrigeration

True, false

Low Power State – whole machine

True, false

OnSite Adjustable by Operator or Owner

True, false

Refrigerant Type

Ozonedepleting, nonozonedepleting

Insulation Type

Ozonedepleting, nonozonedepleting

Internal volume

 

Miscellaneous Refrigeration Products

Product Class

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12

Variable Defrost Control

True, False

Least time Between Defrosts (hours) (when “Variable Control” = True)

 

Max time Between Defrosts (hours) (when “Variable Control” = True)

 

Variable Anti-Sweat Heater Control

True, False

Heater Watts At 5%, 15%, 25%, 35%, 45%, 55%, 65%, 75%, 85%, and 95% humidity (Watts) (when “Variable Anti-Sweat Heater Control” = True)

 

Testing Conducted with Modifications to Standard Temperature Sensor Locations

True, False

Total Refrigerated Volume (ft3)

 

Total Adjusted Volume (ft3)

 

Annual Energy use (kWh/year)

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-B
Room Air Conditioners, Room Air-Conditioning Heat Pumps,
 Packaged Terminal Air Conditioners, and Packaged Terminal Heat Pumps
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Room Air Conditioners and Room AirConditioning Heat Pumps

 

*Voltage

 

*Electrical Phase

1, 3

*Type

Room air conditioner, room air conditioning heat pump, casementonly room air conditioner, casementslider room air conditioner.

*Louvered Sides

Yes,

no

Cooling Capacity at 95°F

 

Electrical Input at 95°F

 

Combined Energy Efficiency Ratio at 95°F

 

Standby and Off Mode Annual Energy Consumption

 

Heating Capability

Heat pump, electric resistance heating, heat pump and electric resistance heating, no heating capability

Refrigerant Type1

Ozonedepleting, nonozonedepleting

Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps

 

*Voltage

 

*Electrical Phase

1, 3

*Type

PTAC, PTHP

Size

Standard, nonstandard

Cooling Capacity at 95°F

 

Electrical Input at 95°F

 

Energy Efficiency Ratio (EER) at 95°F

 

Heating Capability

Heat pump, electric resistance heating, heat pump and electric resistance heating, no heating capability

Heating Capacity (for models with heating capability only)

 

Electrical Input (for models with heating capability only)

 

Coefficient of Performance (for models with heating capability only)

 

Refrigerant Type1

Ozonedepleting, nonozonedepleting

Compressor Power1

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-C
Central Air Conditioners
 Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Air Filters manufactured on or after April 1, 2019

 

Air filter sizes tested

 Small, medium and large

Minimum Efficiency Reporting value (

MERV)

 

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 N/A

Particle size Efficiency for 0.3 to 1.0 µm particle size

 

Particle size Efficiency for 1.0 to 3.0 µm particle size

 

Particle size Efficiency for 3.0 to 10 µm particle size

 

Test procedure used to determine air filter efficiency performance

AHRI 680-2009, or ASHRAE 52.2-2012

Air Filter Length

 

Air Filter Width

 

Air Filter Depth

 

 

Air Filter Face Area

 

Face Velocity Utilized for the test procedure

Value in feet per minute or N/A

Airflow Rate value 1

 

Airflow Rate value 2

 

Airflow Rate value 3

 

Airflow Rate value 4

 

Airflow Rate value 5-Maximum Rated Airflow Rate

 

Initial Resistance at air flow rate value 1

Test results to one-hundredths of an Inch of Water Column

Initial Resistance at air flow rate value 2

Test results to one-hundredths of an Inch of Water Column

Initial Resistance at air flow rate value 3

Test results to one-hundredths of an Inch of Water Column

Initial Resistance at air flow rate value 4

Test results to one-hundredths of an Inch of Water Column

Initial Resistance at air flow rate value 5

Test results to one-hundredths of an Inch of Water Column

Final Resistance at the point where test is terminated and results determined

Test results to one-hundredths of an Inch of Water Column

Dust Holding Capacity at the maximum rated airflow rate as published by the manufacturer

Test results in multiples of one gram

Airflow Rate value determined at an Initial Resistance of 0.1 Inch of Water Column

 

All Central Air Conditioners and Central AirConditioning Heat Pumps

 

*Coil Model Number with which Compressor was Tested (for split systems only)

 

*Type

Air conditioner, heat pump (heating and cooling), heat pump (heating only), heat pump (cooling only)

*Energy Source for Cooling

Electricity, natural gas

*Energy Source for Heating

Gas, oil, electric heat pump, electric resistance, heat pump and electric resistance, none

*ARI Classification

 

*Voltage

 

*Electrical Phase

1, 3

Variable Refrigerant Flow

True, False

Heat Recovery (for Variable Refrigerant Flow models only)

True, False

Vertical Air Conditioner (for single package models only) (required on or after January 1, 2010)

True, False

Refrigerant Type1, 2

Ozonedepleting, nonozone depleting

Thermostatic Expansion Valve (for air source or aircooled models only)

Yes, no

Compressor Motor Design

Singlespeed, dualspeed, multiple speed, variablespeed

AirCooled, Single Package CAC < 65,000 Btu/hour and

AirCooled, Split System CAC < 65,000 Btu/hour

 

Seasonal Energy Efficiency Ratio (SEER)³

 

Cooling Capacity at 82°F³

 

Electrical Input at 82°F³

 

Degradation Coefficient at 82°F³

 

Cooling Capacity at 95°F

 

Electrical Input at 95°F

 

Energy Efficiency Ratio (EER) at 95°F

 

Average Off Mode Power Consumption (Watts)

 

Spaceconstrained Product

Spaceconstrained; variable speed mini-split; small duct, high velocity; not spaceconstrained

AirSource, Single Package Heat Pumps < 65,000 Btu/hour and

AirSource Split System Heat Pumps < 65,000 Btu/hour

 

Seasonal Energy Efficiency Ratio (SEER)

 

Cooling Capacity at 82°F³

 

Electrical Input at 82°F³

 

Degradation Coefficient at 82°F³

 

Cooling Capacity at 95°F

 

Electrical Input at 95°F

 

Energy Efficiency Ratio (EER) at 95°F

 

Average Off Mode Power consumption (Watts)

 

Heating Seasonal Performance Factor (HSPF3

 

Heating Capacity

 

Electrical input

 

Coefficient of Performance (COP) at 47°F (single package vertical heat pumps only)

 

Spaceconstrained Product

Spaceconstrained; variable speed mini-split; small duct, high velocity; not spaceconstrained

Air-Cooled, Single Package CAC ≥ 65,000 and < 760,000 Btu/hour

Air-Cooled, Split System CAC ≥ 65,000 and < 760,000 Btu/hour

 

Cooling Capacity at 95°F

 

Electrical Input at 95°F

 

Energy Efficiency Ratio (EER) at 95°F (effective for models manufactured before January 1, 2018)

 

Integrated Part Load Value (IPLV) (effective for models manufactured before January 1, 2018)

 

Heating System Type1, 2

Gas, oil, electric resistance, none

Air-Source, Single Package Heat Pumps ≥65,000 and  < 760,000 Btu/hour; and

AirSource, SplitSystem Heat Pumps ≥65,000 and <760,000 Btu/hour

 

Cooling Capacity at 95°F

 

Electrical Input at 95°F

 

Energy Efficiency Ratio (EER) at 95°F (effective for models manufactured before January 1, 2018)

 

Intergrated Energy Efficiency Ratio (IEER) at 95°F (effective for models manufactured before January 1, 2018)

 

Integrated Part Load Value (IPLV) If Applicable

 

Heating Capacity at 47°F

 

Electrical Input at 47°F

 

Coefficient of Performance (COP) at 47°F

 

Heating Capacity at 17°F

 

Electrical Input at 17°F

 

Coefficient of Performance (COP) at 17°F

 

EvaporativelyCooled Single Package CAC <760,000 Btu/hour and

EvaporativelyCooled Split System CAC <760,000 Btu/hour

 

Cooling Capacity at 95°F

 

Electrical Input at 95°F

 

Energy Efficiency Ratio (EER) at 95°F

 

Integrated Part Load Value (IPLV) If Applicable

 

Heating System Type1, 2

Gas, oil, electric resistance, none

WaterCooled Single Package CAC < 760,000 Btu/hour and

WaterCooled, Split System CAC < 760,000 Btu/hour

 

Compressor Electrical Input (for models ≥65,000 Btu/hour only)

 

Indoor Fan Electrical Input (for models ≥65,000 Btu/hour only)

 

Outdoor Fan Electrical Input (for models ≥65,000 Btu/hour only)

 

Cooling Capacity at 85°F Entering Water Temperature

 

Electrical Input at 85°F Entering Water Temperature

 

Energy Efficiency Ratio (EER) at 85°F Entering Water Temperature

 

Low Temperature EER at 70°F Entering Water Temperature (for models < 65,000 Btu/hour only)

 

Heating System Type1

Gas, oil electric resistance, none

Water-Source, Single Package Heat Pumps< 760,000 Btu/hour and

WaterSource Split System Heat Pumps < 760,000 Btu/hour

 

Compressor Electrical Input (for models ≥65,000 Btu/hour only)

 

Indoor Fan Electrical Input (for models ≥65,000 Btu/hour only)

 

Outdoor Fan Electrical Input (for models ≥65,000 Btu/hour only)

 

Cooling Capacity at 86°F Entering Water Temperature

 

Electrical Input at 86°F Entering Water Temperature

 

Energy Efficiency Ratio (EER) at 86°F Entering Water Temperature

 

Heating Capacity at 68°F Entering Water Temperature

 

Electrical Input at 68°F Entering Water Temperature

 

Coefficient of Performance (COP) at 68°F Entering Water Temperature

 

Ground WaterSource, Single Package Heat Pumps and

Ground WaterSource
Split System Heat Pumps

 

Compressor Electrical Input (for models ≥65,000 Btu/hour only)

 

Indoor Fan Electrical Input (for models ≥65,000 Btu/hour only)3

 

Outdoor Fan Electrical Input (for models ≥65,000 Btu/hour only)3

 

Cooling Capacity at 59°F Entering Water Temperature (for all sizes, including but not limited to models ≥ 240,000 Btu/hour)

 

Electrical Input at 59°F Entering Water Temperature (for all sizes, including but not limited to models ≥ 240,000 Btu/hour)

 

Energy Efficiency Ratio (EER) at 59°F Entering Water Temperature (for all sizes, including but not limited to models ≥ 240,000 Btu/hour)

 

Heating Capacity at 50°F Entering Water Temperature (for all sizes, including but not limited to models ≥ 240,000 Btu/hour)

 

Electrical Input at 50°F Entering Water Temperature (for all sizes, including but not limited to models ≥ 240,000 Btu/hour)

 

Coefficient of Performance (COP) at 50°F Entering Water Temperature (for all sizes, including but not limited to models ≥ 240,000 Btu/hour)

 

GroundSource, Closed Loop, Single Package Heat Pumps and GroundSource, Closed Loop, Split System Heat Pumps

 

Compressor Electrical Input (for models ≥65,000 Btu/hour only)

 

Indoor Fan Electrical Input (for models ≥65,000 Btu/hour only)3

 

Outdoor Fan Electrical Input (for models ≥65,000 Btu/hour only)3

 

Cooling Capacity at 77°F Entering Brine Temperature

 

Electrical Input at 77°F Entering Brine Temperature

 

Energy Efficiency Ratio (EER) at 77°F Entering Brine Temperature

 

Heating Capacity at 32°F Entering Brine Temperature

 

Electrical Input at 32°F Entering Brine Temperature

 

Coefficient of Performance (COP) at 32°F Entering Brine Temperature

 

GasFired Air Conditioners and Gas Fired Heat Pumps

 

Cooling Capacity – (cooling bin summary)

 

Gas Input While Cooling – (cooling bin summary)

 

Electric Input While Cooling – (cooling bin summary)

 

Cooling COP – Gas

 

Cooling COP – Electric

 

Heating Output – (heating bin summary)

 

Gas Input While Heating – (heating bin summary)

 

Electric Input While Heating – (heating bin summary)

 

Heating COP – Gas

 

Heating COP – Electric

 

Computer Room Air Conditioners

 

 

Equipment Type

Aircooled, watercooled, water cooled with a fluid economizer, glycolcooled, glycolcooled with a fluid economizer, evaporatively cooled; chilled-water-cooled

Air Flow Direction

Downflow, horizontal flow, upflow

Net Sensible Cooling Capacity (Aircooled, watercooled, glycolcooled, glycolcooled, chilled-water-cooled models only)

 

Downflow Unit Power Input (watts) (Aircooled, watercooled, glycolcooled, glycolcooled, chilled-water-cooled models only))

 

Downflow Unit SCOP (Aircooled, watercooled, glycolcooled, glycolcooled, chilled-water-cooled models only)

 

Upflow Unit Power Input (watts) (Aircooled, watercooled, glycolcooled, glycolcooled, chilled-water-cooled models only)

 

Upflow Unit SCOP (Aircooled, watercooled, glycolcooled, glycolcooled, chilled-water-cooled models only)

 

Cooling Capacity at 95°F (evaporatively cooled models only)

 

Electrical Input at 95°F (evaporatively cooled models only)

 

Energy Efficiency ratio (EER) at 95ºF (evaporatively cooled models only)

 

Heat pump water-heating packages

 

 

Voltage*

 

Phase*

1, 3

Refrigerant Type*

Ozone-depleting, non-ozone-depleting

Compressor Motor Design*

Single-speed, dual-speed, multiple-speed, variable-speed

OD Fan Motor Design*

Single-speed, dual-speed, multiple-speed, variable-speed

Model number includes all components?

True, False

Is the model designed for space cooling?

True, False

Cooling Capacity (BTU per hour) if applicable

 

Cooling power input (watts) if applicable

 

Energy Efficiency Ratio (EER) if applicable

 

Integrated part load value (IPLV)

 

Heating Capacity (BTU per hour) at 47º

 

Heating power input (watts) at 47º

 

Coefficient of Performance (COP) at 47º

 

Heating Capacity (BTU per hour) at 17º

 

Heating power input (watts) at 17º

 

Coefficient of Performance (COP) at 17º

 

Heating Capacity (BTU per hour) of heat reclaim2

 

COPR of heat reclaim2

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

 

Table X-D
Portable Air Conditioners, Evaporative Coolers, Ceiling Fans, Ceiling Fan Light Kits
Whole House Fans, Residential Exhaust Fans, Dehumidifiers and Residential Furnace Fans
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Single-Duct and Dual-Duct Portable Air Conditioners

*Duct configuration

Single-duct, dual-duct, ability to operate in both single-duct and dual-duct configurations

Heating function available

True, False

Dehumidification mode available

True, False

Primary condensate removal feature

Auto-evaporation, gravity drain, removable internal collet ion bucket, condensate pump

Single-Duct Portable Air Conditioners

Combined Energy Efficiency Ratio (CEER) (Btu/Wh)

 

Seasonally Adjusted Cooling Capacity (SAAC) (Btu/h

 

Adjusted Cooling Capacity at 83⁰F conditions (Btu/h

 

Adjusted Cooling Capacity at 95⁰F conditions (Btu/h

 

Annual energy consumption in off-cycle mode (kWh/year)

 

Annual energy consumption in inactive or off mode (kWh/year)

 

Annual energy consumption in cooling mode (kWh/year)

 

 

 

Dual-Duct Portable Air Conditioners

Combined Energy Efficiency Ratio (CEER) (Btu/Wh)

 

Seasonally Adjusted Cooling Capacity (SAAC) (Btu/h

 

Adjusted Cooling Capacity at 83⁰F conditions (Btu/h

 

Adjusted Cooling Capacity at 95⁰F conditions (Btu/h

 

Annual energy consumption in off-cycle mode (kWh/year)

 

Annual energy consumption in inactive or off mode (kWh/year)

 

Annual energy consumption in cooling mode at 83⁰F conditions (kWh/year)

 

Annual energy consumption in cooling mode at 95⁰F conditions kWh/year)

 

Spot Air Conditioners

 

*Type

Single package, aircooled; single package, evaporativelycooled; split system: aircooled condensing unit, coil with blower; split system: evaporatively cooled condensing unit, coil alone; single package, aircooled (FD); single package, evaporativelycooled (FD); split system: aircooled condensing unit, coil with blower (FD); split system: evaporatively cooled condensing unit, coil alone (FD)

Cooling Capacity

 

Total Electrical Input

 

Cooling Efficiency Ratio (

CER)

 

 

Fan Electrical Input

 

Refrigerant Type

Ozonedepleting, nonozonedepleting

Evaporative Coolers

 

 

*Type

Direct, indirect, indirect/direct

Evaporative Media Saturation Effectiveness (%) (for direct evaporative coolers only)

 

Media Type (for direct evaporative coolers only)

Expanded paper, woven plastic, aspen wood, rigid cellulose, other (specify).

Cooling Effectiveness (for indirect evaporative coolers only)

 

Total Power (watts)

 

Airflow Rate (CFM)

 

ECER

 

Ceiling Fans

 

 

Ceiling fan type (reuired for models manufactured on or after January 21, 2020)

High-speed small-diameter (HSSD), hugger, large diameter, standard, very small-diameter (VSD)

CFM (low, medium, high)

 

Watts (low, medium, high)

 

Efficacy (low, medium, high) [CFM/watt]

 

Efficacy (low, medium, high) [CFM/watt]

 

Fan speed controls separate from light controls

True, false

Adjustable Speed Controls

(Specify) speed, variable

Reversible Fan Action Capable

Yes, no, Exception [See Section 1605.1(d)(1)(A)(3) of this Article]

Light Source Type

Compact fluorescent, incandescent, other (specify), None

Ceiling Fan Light Kits manufactured before January 21, 2020

 

Socket Type

Medium screw base, pinbased; other (specify)

Packaged with all appropriate lamps to fill all sockets

Yes, no

Screw-based Lanps Requirement (screw-base only)

1605.1(d)(2)(A)(1) of this Article (specify)

Meet 1605.1(d)(2)(B)(1) (pin-based sockets only)

True, False

Operate with lamps totaling more than 190 watts (other socket types only)

True, False

Ceiling Fan Light Kits manufactured on or after January 21, 2020

 

Socket Type

Medium screw base, pinbased; other (specify)

Packaged with all appropriate lamps to fill all sockets

True, False

Lumens for each basic model of lamp or each basic model of integrated SSL (lm)

 

Rated wattage (watts)

 

Efficacy (lm/W)

 

Medium screw base sockets packaged with compact fluorescent lamps

True, False

Meet 1605.1(d)(2)(D)(1) (Medium screw base sockets packaged with compact fluorescent lamps only)

True, False

Pin-based sockets for fluorescent lamps

True, False

Uses an electronic ballast (Pin-based sockets for fluorescent lamps only)

True, False

Whole House Fans and Residential Exhaust Fans

 

*Residential Exhaust Fan Type

Inline singleport, Inline multiport, Range hood, Bathroom and utility room

*WholeHouse Fan Type

Beltdrive singlefan, Beltdrive dualfan, Directdrive singlefan, Directdrive dual fan

Fan Motor Power (watts)

 

Air Flow (CFM)

 

Air Flow Efficiency (CFM/watt)

 

Dehumidifiers

 

 

 

Product capacity (pints per day)

 

Energy Factor

 

Residential Furnace Fans

 

Furnace Fan Type

Non-weatherized, non-condensing gas (NWG-NC); Non-weatherized, condensing gas (NWG-C); Weatherized non-condensing gas (WG-NC); Weatherized condensing gas (MH-NWG-C);Non-weatherized, non-condensing oil (NWO-NC); Non-weatherized electric furnace/ modular blower fan (NWEF/NWMB); Mobile home non-weatherized, non-condesing gas (MH-NWG-NC); Mobile home non-weatherized, condensing gas (MH-NWG-C); Mobile home electric furnace/modular blower fan (MH-EF/MB); Mobile home non-weatherized oil (MG-NOW); Mobile home weatherized gas

Wattage

 

Airflow at the maximum airflow-control setting (in cfm)

 

Fan Energy Rating (FER)

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-E
Gas and Oil Space Heaters and Electric Residential Boilers
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

All Space Heaters

 

*Energy Source

Natural gas, LPG, oil, combination (natural gas and oil), electricity

*Burner Type

Induced draft, luminous, injection type, power, pressure

Constant burning pilot light, (for gas or oil models only)

True, False

*Labeled for Outdoor Installation

True, False

*Electrical Phase

1, 3, none

Draft Equipment12

Draft hood, draft diverter, barometric regulator, none

OffCycle Devices

Stack damper, electromechanical inlet damper, electromechanical flue damper, none

Flue Gas

Condensing, noncondensing

Control

 

Singlestage, twostage modulating, step modulating

Fan Motor Design (furnaces only)1, 2

Singlespeed, dualspeed, multiplespeed, variable speed

Total Nominal Fan Motor Horsepower (furnaces only)

 

Fan Motor Type (furnaces only)

Premium, standard

Fan Motor Power Factor (furnaces with variablespeed motors only)1, 2

 

Pump Motor Design (boilers only).
Note: This information is not required for boilers that are not provided with a pump.

Singlespeed, dualspeed, multiplespeed, variable speed

Total Nominal Pump Motor Horsepower (boilers only).
Note: This information is not required for boilers that are not provided with a pump.

 

Pump Motor Type (boilers only)
Note: This information is not required for boilers that are not provided with a pump.

Premium, standard

Pump Motor Power Factor (boilers with variablespeed motors only)1, 2

 

Nameplate Input Rating

 

Rated Output

 

Central Furnaces

 

 

*Mobile Home

True, False

*Air Flow Direction

Up, down, horizontal

Weatherized (required for non-mobilehome furnaces manufactured on or after November 19, 2015 only)

True, False

Fan Blower Capacity, High, at 0.5” W.C.1, 2

 

Fan Blower Capacity, Low, at 0.5” W.C.1, 2

 

Thermal Efficiency (for models ≥ 225,000 Btu/hour input and for threephase equipment < 225,000 Btu/hour input for which the manufacturer chooses to test using 10 C.F.R. sections 431.75 and 431.76)

 

Standby Watts [controls, not fan energy] (for models ≥ 225,000 Btu/hour input only)1, 2

 

Annual Fuel Energy Consumption (for models < 225,000 Btu/hour input only, except for threephase equipment for which the manufacturer chooses to test using 10 C.F.R. sections 431.75 and 431.76)

 

Annual Fuel Utilization Efficiency [AFUE] (for models < 225,000 Btu/hour input only, except for threephase equipment for which the manufacturer chooses to test using 10 C.F.R. sections 431.75 and 431.76)

 

Annual Auxiliary Electrical Energy Consumption (for models < 225,000 Btu/hour input only, except for threephase equipment for which the manufacturer chooses to test using 10 C.F.R. sections 431.75 and 431.76)

 

Thermal Efficiency at Minimum Capacity Provided and Allowed by the Controls (for models ≥ 225,000 Btu/hour input only)1, 2

 

Maximum Standby Mode Electrical Power Consumption (Watts) (applies to models manufactured on or after May 1,
2013 only)1, 2

 

Maximum Off Mode Electrical Power Consumption (Watts) (applies to models manufactured on or after May 1, 2013 only) 1, 2

 

Room Heaters, Floor Furnaces, and Wall Furnaces

 

*Type

Room heater (vented fan); room heater (gravity); floor furnace (fan); floor furnace (gravity); wall furnace (direct vent fan); wall furnace (direct vent gravity); wall furnace (vented fan); wall furnace (vented gravity)

Annual Fuel Utilization Efficiency (AFUE)

 

 

Auxiliary Electric Power (for fantype heaters only)

 

Average Annual Auxiliary Electrical Energy Consumption (for fantype heaters only)1

 

Duct Furnaces and Unit Heaters

 

*Type

Duct furnace; low static unit heater; high static unit heater; floormounted unit heater

Thermal Efficiency at Maximum Rated Capacity (mandatory for duct furnaces, voluntary for unit heaters only)

 

Energy Consumption During Standby (mandatory for duct furnaces, voluntary for unit heaters only)

 

Thermal Efficiency at Minimum Rated Capacity (mandatory for duct furnaces, voluntary for unit heaters only)

 

PowerVenting

True, False

Automatic Flue Damper

 

True, False

Infrared Gas Space Heaters

 

 

*Type

Patio heater, nonpatio heater

Intensity

High, low

Radiant Tube Type

True, False

Portable

True, False

Vented

True, False

Physically Possible to Measure Radiant Coefficient

True, False

Combustion Efficiency (for models using ANSI test method only)

 

Radiant Coefficient (for models using ANSI test method only; for models for which it is physically possible to measure radiant coefficient only)

 

Effective Heating Area (for patio heaters only)

 

Efficiency Index (for patio only)

 

Combination SpaceHeating and Water Heating Equipment

 

*Primary Function

Primary function is space heating, secondary function is domestic water heating; primary function is domestic water heating, secondary function is space heating

Volume (measured)

 

Volume (rated)

 

Energy Factor (for those models whose primary function is water heating)

 

Effective SpaceHeating Efficiency (CAAFUE) (for those models whose primary function is water heating)

 

Annual Fuel Utilization Efficiency (AFUE) (for those models whose primary function is space heating)

 

Effective WaterHeating Efficiency (CAEF) (for those models whose primary function is space heating)

 

 Combined Annual Efficiency (CAE)

 

Boilers

 

*Type

Steam, hot water

Natural Draft (for gasfired steam models manufactured on or after March 2, 2012 and ≥ 300,000 Btu/hour input only)

True, False

Design

Copper, cast iron, other

Automatic means for adjusting water temperature (small hot water boilers only)

True, False

Input at Minimum Capacity1

 

Output at Minimum Capacity1

 

Combustion Efficiency (for models ≥ 300,000 Btu/hour input only)

 

Thermal Efficiency (for models ≥ 300,000 Btu/hour input and < 2,500,000 Btu/hour input only)

 

Thermal Efficiency (for models ≥ 2,500,000 Btu/hour input only)1

 

Standby Loss (for packaged boilers ≥ 300,000 Btu/hour input only) 1

 

Standby Loss (for nonpackaged boilers ≥ 300,000 Btu/hour input only) 2

 

Thermal Efficiency at Minimum Capacity Rating (for non packaged boilers ≥ 300,000 Btu/hour input only)

 

AFUE (for models < 300,000 Btu/hour input only)

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-F
Water Heaters
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

All Water Heaters

 

*Energy Source

Natural gas, LPG, oil, electric resistance, heat pump

Rated Volume (except booster heaters, hot water dispensers, and large instantaneous water heaters < 10 gallons capacity)

 

Measured Volume (water heaters regulated under 10 C.F.R. section 431 subpart G as of January 1, 2017 only)

 

Input Rating

 

Heat Traps (for storage models only)

True, False

Ozone Depleting Substance in Insulation1, 2

True, False

Ozone Depleting Substance in Refrigerant (for heat pump water heaters only) 1, 2

True, False

Constant burning pilot light (for large gas and oil models only)

True, False

Mobile Home

True, False

Water Heaters Regulated Under 10 C.F.R. section 430.32

 

Water Heater Type

Gas-fired storage, oil-fired storage, electric storage, tabletop, instantaneous gas-fired, instantaneous electric, grid-enabled

First Hour Rating (for storage models only)

 

Maximum Gallons Per Minute (for instantaneous models only)

 

Recovery Efficiency

 

 

Annual Electrical Energy Consumption

 

Annual Fossil Fuel Energy Consumption (fossil fuel-fired models only)

 

Draw Pattern

Very small, low, medium, high

Uniform Energy Factor

 

 

Pilot Light Energy Consumption (for gas instantaneous models only)

 

Water Heaters Regulated Under 10 C.F.R. section 431.110
(EXCEPT residential-duty commercial water heaters)

 

Water Heater Type

Electric storage, gas-fired storage, oil-fired storage,  gas-fired instantaneous, gas-fired instantaneous

Thermal Efficiency

 

Standby Loss, %/hr (electric models only) except for those models > 140 gallons for which exemption from standby loss standard is claimed)
Note: this data requirement is mandatory for all models except instantaneous models in which the data requirement is voluntary

 

Standby Loss Btu/hr (fossil fuel fired models only) except for those models > 140 gallons for which exemption from standby loss standard is claimed)
Note: this data requirement is mandatory for all models except instantaneous models in which the data requirement is voluntary

 

Electrical Power During Recovery While Appliance is Heating (for storage models only)

 

Electrical Power During Standby

 

R-value of Insulation (for models > 140 gallons only) for which exemption from standby loss is claimed

 

Flue Damper (for models > 140 gallons only)

True, False

Fan Assisted Combustion (for models > 140 gallons only)

True, False

Hot Water Supply Boiler (for instantaneous models with input ≥ 300,00 Btu/hour and ≤ 12,500,000 Btu/hour only)

True, False

Residential Duty Commercial Water Heaters

Water Heater Type

Gas-fired storage, oil-fired storage electric instantaneous

Volume

 

Input

 

Draw Pattern

Very small, low, medium, high

Uniform Energy Factor

 

* “Identifier” information as described in Section 1602(a).
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X G
Pool Heaters, Portable Electric Spas, Residential Pool Pump and
 
Motor Combinations, and Replacement Residential Pool Pump Motors
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Heat Pump Pool Heaters

 

Heating Capacity at Standard Temperature Rating

 

ReadilyAccessible onoff Switch

True, False

Coefficient of Performance at Standard Temperature Rating

 

Heating Capacity at Low Temperature Rating

 

Coefficient of Performance at Low Temperature Rating

 

Average Coefficient of Performance (COP) at Standard Temperature Rating and Low Temperature Rating

 

Refrigerant Type1, 2

Ozonedepleting, nonozone depleting

Other Pool Heaters

 

Energy Source

Natural gas, LPG, oil, electric resistance

Constant Burning Pilot Light (for gas models)

True, False

Input

 

 

Thermal Efficiency

 

 

Pumps (data collection required for models manufactured on or after January 27, 2020 only)

 

Equipment Class

 Category in Table G-2

Total Pump Head in feet At BEP

 

Total Pump Head in feet at nominal speed

 

Volume per unit time (flow rate) in gallons per minute (gpm) at BEP

 

Volume per unit time (flow rate) in gallons per minute (gpm) at nominal speed

 

Nominal speed of rotation (rpm)

 

Calculated driver power input at each load point i (Pini) corrected to nominal speed, in horsepower (hp)3

 

Driver power input (measured as the input power to the driver and controls) at each load point i (Pini), corrected to nominal speed, in horsepower, (hp)4

 

Driver power input at each load point i (Pini), corrected to nominal speed, in horsepower, (hp)5

 

Full impeller diameter in inches

 

PEICL calculated or tested4

 

PEIVL calculated or tested5

 

Number of stages tested RSV and ST pumps only

 

Pump efficiency at BEP in in percent (%)1,3,4

 

Pump efficiency at BEP in PERCL1,3,4

 

Pump efficiency at BEP in percent (%)1,5

 

Pump efficiency at BEP in PERVL1,5

 

Pump configuration

 

Nominal motor efficiency in percent (%)4,5,6

 

Motor horsepower (hp) for the motor with which the pump is being rated4,5,6

 

Bowl diameter in inches (ST pumps only)3,4,5

 

PEICL

 

PEIVL

 

C-value

 

Residential Pool Pump and Motor Combinations and Replacement Residential Pool Pump Motors manufactured before July 19, 2021

 

Motor Construction is Split-Phase

True, False

Motor Construction is Capacitor Start-Induction Run

True, False

Motor Design

Singlespeed, dualspeed, multispeed, variablespeed

Motor has Capability of Operating at Two or More Speeds with the Low Speed having a Rotation Rate that is No More than OneHalf of the Motor’s Maximum Rotation Rate

True, False

Unit Type

Residential Pool Pump and Motor Combination,
Replacement Residential Pool Pump Motor

Pool Pump Motor Capacity

 

 

Motor Service Factor

 

Nameplate Horsepower

 

Pump Control Speed (compliance with Section 1605.3(g)(5)(B)(2) of this Article)

True, False

 

 

 

Dedicated-Purpose Pool Pumps manufactured on or after July 19, 2021

Dedicated-purpose pool pump product group

Self-priming pool filter pumps with rated hydraulic horsepower of 0.711 hp <= hhp < 2.5 hp. Self-priming pool filter pumps with rated hydraulic horsepower of hhp <0.711 hp. Non-self-priming pool filter pumps. Pressure cleaner booster pumps. Integral cartridge-filter pool pumps. Integral sand-filter pool pumps. Waterfall pumps

Freeze Protection Controls when Shipped

Enabled, Disabled, Not applicable

Default Dry-Bulb Air Temperature setting (in degrees F) (when “Freeze Protection Controls when Shipped” = Enabled)

 

Default Run-Time Setting (in minutes) (when “Freeze Protection Controls when Shipped” = Enabled)

 

Default Motor Speed (in rpm) (when Freeze Protection Controls when “Freeze Protection Controls when Shipped” = Enabled)

 

Default Motor Speed is More than of the Maximum Available Speed (when Freeze Protection Controls when “Freeze Protection Controls when Shipped” = Enabled)

 

 

 

 

Self-Priming Pool Filter pumps, Non-Self-Priming Pool Filter Pumps, Pressure Cleaner Booster pumps or Waterfall Pumps

Weighted Energy Factor (WEF) in kilogallons per kilowatt-hour (kgal/kWh)

 

Rated Hydraulic Horsepower in horsepower (hp)

 

Speed Configuration for which the pump is being rated

Single-speed, Two-speed, Multi speed, or Variable-speed

True Power Factor at High Load Point

 

Dedicated-Purpose Pool Pump Nominal Motor Horsepower

 

Dedicated-Purpose Pool Pump Motor Total Horsepower

 

 

Dedicated-Purpose Pool Pump Service Factor

 

 

Input Power at the High Flow Load Point (watts)

 

Flow Rate at the High Flow Load Point (gpm)

 

Speed at the High Flow Load Point (rpm)

 

 

 

 

Self-priming pool filter pumps, Non-self-priming pool filter pumps or Pressure cleaner booster pumps

Input Power at Maximum Rotating Speed (watts)

 

Flow Rate at Maximum Rotating Speed (gpm)

 

Speed at Maximum Rotating Speed (rpm)

 

 

 

 

Self-priming pool filter pumps or Non-self-priming pool filter pumps

True Power Factor at Low Load Point

 

Pump Certified with NSF/ANSI 50-2015

True, False

Vertical Lift (in feet) (when “Pump Certified with NSF/ANSI 50-2015” = False)

 

True Priming Time (in minutes) (when “Pump Certified with NSF/ANSI 50-2015” = False)

 

Input Power at the Low Flow Load Point (watts)

 

Flow Rate at the Low Flow Load Point (gpm)

Speed at the Low Flow Load Point (rpm)

 

 

 

 

Self-priming pool filter pumps, Non-self-priming pool filter pumps, or Waterfall Pumps

Maximum Head (in feet)

 

 

 

 

Integral cartridge-filter pool pumps or Integral sand-filter pool pumps

Pool pump control is either integral to the pump or a separate component that is sold or offered for sale with the pump.

True, False

Maximum Run-Time (in hours) of the Pool Pump Control

 

 

 

 

Replacement Dedicated-Purpose Pool Pump Motors manufactured on or after July 19, 2021

Replacement Dedicated-Purpose Pool Pump Motor is a Variable-speed replacement dedicated-purpose pool pump motor

True, False

Dedicated-purpose pool pump motor total horsepower (hp)

 

Nominal efficiency at full-loadand maximum operating speed (%)

 

Motor speed at full-load and maximum operating speed (rpm)

 

Motor torque at full-load and maximum operating  speed (lb-ft)

 

Input power at full-load and maximum operating speed (watts)

 

Power factor at full-load and maximum operating speed (%)

 

Motor phase

Single-phase, polyphase

Sold with motor drive

True, False

Meets requirements of 1605.3(g)(6)(D) (when “Sold with motor drive” = True)

True, False

Freeze protection controls is shipped enabled

Enabled, Disabled, Not applicable

Default dry bulb air temperature setting (“Freeze protection controls are shipped enabled”)

 

Default motor speed (rpm) (when “Freeze protection controls are shipped enabled”)

 

Default run time (minutes) (when “Freeze protection controls are shipped enabled”)

 

Is the default motor speed more than 1/2 of the maximum available speed? (when “Freeze protection controls are shipped enabled”)

True, False

 

 

 

Portable Electric Spas

*Spa type

Combination Spa, Exercise Spa, Inflatable Spa, Standard Spa

*Tested Spa Cover Model Number

 

Tested Spa Cover Manufacturer

 

Rated Capacity (number of people)

 

Rated Voltage (volts)

 

Tested Spa Cover Is Insulated

True, False

Spa Enclosure is Fully Insulated

True, False

Spa includes a skimmer

True, False

Maximum water Temperature setting is less than 1000 (for exercise spas and the exercise spa portion of combination spas only)

True, False

Portable Electric Spa Rated Volume (gallons)  (for standard spas, inflatable spas, and the standard spa portion of combination spas only)

 

Exercise Spa Rated Volume (gallons)  (for exercise spas, and the exercise spa portion of combination spas only)

 

Portable Electric Spa Fill Volume (gallons)  (for standard spas, inflatable spas, and the standard spa portion of combination spas only)

 

Exercise Spa Fill Volume (gallons) (for exercise spas, and the exercise spa portion of combination spas only)

 

Portable Electric Spa Normalized Standby Power (Watts) (for standard spas, inflatable spas, and the standard spa portion of combination spas only)

 

Exercise Spa Normalized Standby Power (Watts) (for exercise spas, and the exercise spa portion of combination spas only)

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federallyregulated appliances
2 = Voluntary for stateregulated appliances

Table X H
Plumbing Fittings
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Plumbing Fittings

 

 

*Type

Showerhead, lavatory faucet (independent or collective), public lavatory faucet, kitchen faucet, metering faucet (independent or collective), lavatory replacement aerator, kitchen replacement aerator, wash fountain, lifttype tub spout diverter, turntype tub spout diverter, pulltype tub spout diverter, pushtype tub spout diverter

Flow Rate

 

 

Pulsating (for showerheads only)

True, False

Minimum Flow rate at 45 psi and 80 psi (for showerheads manufactured on or after July 1, 2016

 

Minimum Flow rate at 20 psi (for showerheads manufactured on or after July 1, 2016

 

Rim Space (for wash fountains only)

 

Tub Spout Leakage Rate When New

 

Tub Spout Leakage Rate After 15,000 Cycles

 

Commercial Prerinse Spray Valves

 

 

Product Class (required for models manufactured on or after January 28, 2019)

Product Class 1, Product Class 2, Product Class 3

Flow Rate (gpm)

 

Spray force (ounce-force (ozf))

 

 

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federallyregulated appliances
2 = Voluntary for stateregulated appliances

Table X I
Plumbing Fixtures
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Plumbing Fixtures

 

 

*Type

Blowout water closet, gravity tank type water closet, dualflush water closet, electromechanical hydraulic water closet, flushometer tank water closet, prisontype urinal, prisontype water closet, flushometer valve water closet, trough type urinal, wallmounted urinal, waterless urinal, other type urinal, vacuum type water closet

Water Consumption (dualflush effective flush volume for dualflush water closet)

 

Passes waste extraction test

True False

Waste extraction value

grams

Trough Length (troughtype urinals only)

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X J
Fluorescent Lamp Ballasts and Deep Dimming Lamp Ballasts
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Fluorescent Lamp Ballasts

 

 

*Ballast Input Voltage

120, 277, between 120 and 277 other (specify)

*Number of Lamps

 

*Type of Fluorescent Lamp

F34T12, F96T12/ES, F96T12HO/ES (2-foot U-shaped, 4-foot medium bipin, 4-foot miniature bipin high output, 4-foot miniature bipin standard output, 8-foot high output, 8-foot slimline

Product Class (from U.S. DOE CCMS product template

 

Designed for Dimming to 50% or Less of Maximum Output

True False

Power Factor

 

 

*Building Application

Commercial, designed (not classified as sign ballasts) to operate 8-foot high output lamps, designed and labeled as sign ballasts to operate 8-foot high output lamps, residential; not classified as residential, other

Sign Ballasts

True False

Input Power Watts

 

Ballast Luminous Efficiency

 

 

Circuit Design

Cathode cutout, electronic, magnetic

*Start

Instant, programmed rapid

Ballast Frequency

High frequency, low frequency, other

Average Total Lamp Arc Power

 

 

Deep-Dimming Fluorescent Lamp Ballasts

 

*Ballast Input Voltage

120, 277, other (specify)

*Number of Lamps

 

*Lamp Type

T5, T8, other (specify)

*Dimming Type

Continuous, stepped, individual lamp control, other (specify)

*Control Type

3-wire, 0-10 volts, digital communication, phase, other (specify)

*Start Type

Instant start, rapid start, program start, other (specify)

P100

 

Arc Power 100

 

P80

 

Arc Power 80

 

P50

 

Arc Power 50

 

BLE 100

 

BLE 80

 

BLE 50

 

 

P0 (standby mode power)

 

Weighted Ballast Luminous efficacy

 

 

Power Factor

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X K
Lamps
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Federallyregulated general service

fluorescent lamps

 

 

*Type

4foot medium bipin general service fluorescent lamp, 2foot Ushaped general service fluorescent lamp, 8foot slim line general service fluorescent lamp, 8foot high output general service fluorescent lamp, 4foot miniature bipin standard output general service fluorescent lamp, 4foot miniature bi pin high output general service fluorescent lamp

Rated Color Rendering Index

 

Correlated Color Temperature (for lamps manufactured on or after July 15, 2012)

 

Minimum Average Lamp Efficacy (LPW)

 

Federally regulated Medium Screw Base Compact Fluorescent Lamps sold before January 1, 2020

 

Lamp Power (Watts)

 

Minimum Efficacy (LPW)

 

Lamp Configuration

Bare or Covered (no reflector)

1,000 Hour Lumen Maintenance

True False

Lumen Maintenance Requirements

True False

Rapid Cycle Stress Test

True False

Average Rated Lamp Life

True False

Federally regulated Medium Screw Base General Service Incandescent and OLED Lamps sold before January 1, 2020

 

Type

General Service Incandescent, LED, OLED

Voltage Range

 

 

Rated Lumen Range

 

Maximum Rate Wattage

 

Minimum Rate Lifetime

 

Color Rendering Index

 

Minimum Efficacy (LPW) (required on or after January 1, 2018)

 

Modified Spectrum

 

Yes, no

Bulb Finish (incandescent only)

Clear, frost, soft white

ANSIdesignated Bulb Shape

A15, A19, A21, A23, A25, PS25, PS30, BT14.5, BT15, CP19, TB19, CA22

Federally regulated Candelabra Base and Intermediate Base Incandescent Lamps sold before January 1, 2020

Base Type

Maximum Rated Wattage

Candelabra, intermediate

 

 

Federally regulated Medium Screw Base Modified Spectrum General Service Incandescent Lamps sold before January 1, 2020

Type

              

Rated Voltage

 

 

Rated Lumen Range

 

Maximum Rate Wattage

 

Minimum Rate Lifetime

 

Color Rendering Index

 

State-regulated small diameter

directional lamps

 

Base Type

Lamp Type (examples PAR-16, MR-11, MR-16, R)

 

Lamp Power (Watts)

 

Lamp Output (Lumens)

 

Beam Angle

 

 

Center Beam Candle Power (CBCP)

 

Efficacy (Lumens per Watt)

 

Color Rendering Index (CRI)

 

 

Combined CRI + Efficacy (only applies where efficacy < 80 LPW)

 

Correlated Color Temperature

 

Rated Lifetime Test Completed

 

Estimated rated Lifetime (hours) (when “Rated Lifetime Test Completed = False

True False

Rated Lifetime (hours) (when “Rated Lifetime Test Completed = True)

 

Average lamp efficacy

 

 

 

State-regulated

Light Emitting Diode (LED) lamps

 

Base Type

Lamp Shape

E12, E17, E26, GU-24, retrofit kit

Dimmable

A, B, BA, C. CA. F. G. other

Minimum Dimming level (%) (if Dimmable = True)

True, False

Reduced Flicker Operation (if Dimmable = True)

 

Correlated Color Temperature

True, False

Duv

 

 

Rated Lifetime Test Complete

 

Estimated rated Lifetime (hours) (when “Rated Lifetime Test Completed = False

 

Rated Lifetime (hours) (when “Rated Lifetime Test Completed = True)

 

Lifetime test environment temperature

 

Lamp Power (Watts)

Ambient, Elevated

Lumen Output (Lumens)

 

Efficacy (Lumens per Watt)

 

Color Rendering Index (Ra)

 

Compliance Score

 

Power Factor

 

 

Standby Power (Watts (if applicable)

 

R1

 

R2

 

R3

 

R4

 

R5

 

R6

 

R7

 

R8

 

R92

 

Meets applicable luminous intensity distribution requirements

 

Warranty Length (years)2

ENERGY STAR® Omnidirectional, California Quality Specification Omnidirectional, ENERGY STAR® Decorative, California Quality Specification Recessed Can Housing Retrofit Kit, California Quality Specification Spotlight, California Quality Specification Floodlight, none

Audible Noise at 100% output (decibels)

 

Audible Noise at 20% output (decibels)

 

Start Time2

 

6000 hour lumen maintenance2

 

6000 hour survival rate2

 

Projected time to L702

 

 

 

Connected network type (if applicable)

 

 

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X L
Emergency Lighting
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Emergency Lighting

 

Light Source Type

LED, electroluminescent, fluorescent, incandescent, other (specify)

Battery Backup

 

True, False

Number of Faces

 

Sign Format

Edgelit, panel, matrix, stencil, other (specify)

Input Power Demand

 

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliance

Table X-M
Traffic Signal Modules
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Traffic Signal Modules for Vehicle control

 

Module Color

Green, amber, red

Module Type

Circular, arrow, lane controlarrow, lane controlX, pedestrian, other (specify)

Modular Size (circular, arrow only)

 

Nominal Wattage at 25° C

 

Maximum Wattage at 74° C

 

Traffic Signal Modules for Pedestrian Control

 

Module Type

Hand, Walking Person, walk, don’t walk, countdown (Specify)

Power Consumption at 25° C

 

Power Consumption at 74° C

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X- N
Luminaires and Torchieres
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Torchieres

 

 

*Lamp Type of UpwardFacing Lamp(s)

Screwbased Incandescent, Halogen, Fluorescent Pinbased, Other (specify)

*Lamp Type of Side Lamp(s)

Screwbased Incandescent, Halogen, Fluorescent Pinbased, Other, None (specify)

Total Number of Lamp Sockets

 

Maximum Possible Power Demand, All Sockets (watts)

 

Method of Insuring 190 Watt Maximum Power Consumption

Currentlimiting Device, Thermal Switch, Other (specify)

Portable

Luminaires

 

 

Type of Portable Luminaire

Floor, table, other (specify)

Total Number of lamp sockets

 

Base type

Candelabra base, intermediate base, medium screwbase, pinbase; other (specify)

Compliance method used

Dedicated fluorescent lamp socket; GU24 linevoltage socket; LED luminaire or light engine; E12, E17, or E26 screwbased socket w/ prepackaged lamp; Halogen lamp socket w/ controls

Zero standby power (for luminaires with internal power supplies only)

Yes, No

GU24 sockets rated (for use with incandescent lamps for luminaires with GU24 sockets only)

Yes, No

LED Light Output (for LED luminaires only)

 

LED Efficacy (for LED luminaires only)

 

Nominal Color Correlated Temperature (for LED luminaires only)

 

Color Rendering Index (for LED luminaires only)

 

Power Factor (for LED luminaires labeled or sold for residential use only)

 

Metal Halide Luminaires

 

*Lamp Position (orientation)

Vertical BaseUp, Vertical Base Down, Horizontal, Universal, Other (specify)

Lamp Rating, low (watts)

 

Lamp Rating, high (watts)

 

Outdoor Luminaire

Yes, no

Compliance Option Used

≥ 90/92% efficient ballast,

≥ 88% efficient ballast with integral control (Occupancy Sensor),
≥ 88% efficient ballast with integral control (Automatic Daylight Control),
 ≥ 88% efficient ballast labeled for relamping with only 150160 watt, 200215 watt, 290335 watt, or 336500 watt lamps

Ballast Type [only applies to models manufactured on or after January 1, 2006]

Probestart electronic, probestart magnetic, pulsestart electronic, pulsestart magnetic, other (specify)

Minimum Ballast Efficiency (percent)

 

Lamp Exceptions2

Exception(s) met, no exceptions met

Integral Control Type (for integral control compliance method only)

Occupancy sensor, Automatic daylight control

Integral Control Method (for integral control compliance method only)

Directly into luminaire housing Packaged and sold prewired Integrated wireless radio controlled sensor

Maximum relamping rated wattage on a factoryinstalled label (watts) (for relamping wattage compliance method only)

 

Packaged with efficient lamps (for relamping wattage compliance method only)

Yes, no

UnderCabinet Fluorescent Fixtures (Luminaires)

 

Lamp Length (inches)

 

Number of Lamps for which Fixture (Luminaire) is Designed

 

Ballast Efficacy Factor

 

* “Identifier” information as described in Section 1602(a)
 1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-O
Dishwashers
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

* Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Dishwashers

 

 

*Type

Compact, standard

* Number of Place Settings

 

Water Heating

Dishwasher

 

Yes, no

Truncated Normal Cycle Capable

Yes, no

Soil Sensing

Yes, no

Maximum Energy Use

 

Maximum Water Use

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-P
Clothes Washers
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

** Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Clothes Washers that are federally regulated consumer products

 

*Type

Frontloading, top loading

*Controls

Automatic, semiautomatic, other (specify)

*Axis

Horizontal, vertical

SudsSaving

 

Yes, no

Combination Washer/Dryer1

Yes, no

Clothes Container Compartment Capacity

 

Power Consumption Per Cycle1

 

Water Consumption Per Cycle

 

Energy Factor

 

Water Factor

 

 

Remaining Moisture Content

 

Clothes Washers that are not federallyregulated consumer products

 

*Type

Frontloading, top loading

*Controls

Automatic, semiautomatic, other (specify)

*Axis

Horizontal, vertical

SudsSaving

Yes, no

Combination Washer/Dryer

Yes, no

Clothes Container Compartment Capacity

 

Power Consumption Per Cycle

 

Water Consumption Per Cycle

 

Energy Factor

 

Water Factor

 

Remaining Moisture Content (required only on and after January 1, 2004)

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-Q
Clothes Dryers
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

** Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Clothes Dryers

 

 

*Energy Source

Gas, electric

*Drum Capacity

 

*Voltage

120, 240, other (specify)

Combination Washer/Dryer1

Yes, no

Venting

Vented, ventless

Combined Energy Factor

 

Constant Burning Pilot Light (Gas models only)

Yes, no

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-R
Cooking Products and Food Service Equipment
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

** Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Consumer Product Cooking Products

 

*Type

Conventional range, conventional cooking top, conventional oven, microwaveonly oven, countertop convection microwave oven, builtin microwave oven, , overthe range convection microwave oven, microwave/ conventional cooktop, microwave/ conventional oven, microwave/conventional range, other (specify)

*Energy Source

Gas, electric, microwave

Electrical Supply Cord (for gas models only)

Yes, no

*Constant Burning Pilot Light

Yes, no

Annual Cooking Energy Consumption

 

Annual SelfCleaning Energy Consumption (for conventional ovens only)

 

Total Annual Energy Consumption (for conventional ovens only)

 

Clock Power Consumption (for gas conventional ovens only)

 

Pilot Light Consumption (for gas conventional ovens only)

 

Annual Secondary Energy Consumption (for gas conventional ovens only)

 

Average Standby Power (data required for various microwave ovens manufactured on or after June 17, 2016 only)

 

Off Mode Power1

 

On Mode Power

 

Commercial Convection Ovens

 

 

Energy Input Rate

 

Idle Energy Consumption Rate

 

Commercial Hot Food Holding Cabinets

 

 

Measured Interior Volume (cu. ft.)

 

Energy Input Rate

 

Idle Energy Consumption Rate

 

Commercial Range Tops

 

 

Energy Input Rate

 

Cooking Energy Efficiency

 

Test Cooking Vessel Diameter

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-S
Electric Motors
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

** Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Electric Motors

 

 

Type(data required for Subtype I, Subtype II, Fire Pump and NEMA Design B motors on or after December 19, 2010 only)  (data required for small electric motors manufactured on or after March 9, 2015 only)

NEMA Design A, NEMA Design B, IEC Design N, other equivalent design, Multiple-Designs (two or more of NEMA Design A, NEMA Design B, IEC Design N, other equivalent design), General purpose subtype I, General purpose subtype II, Fire pump motor, NEMA Design B general purpose

Voltage

230, 460 230 and 460, multivoltage (includes 230 or 460)

Speed1

Single, multiple

Rated Horsepower

 

Input Power

 

In kilowatts (kW)

Air Exchange

Open, enclosed

Number of Poles

2, 4, 6, 8

Nominal Full Load Efficiency

 

 

* “Identifier” information as described in Section 1602(a)
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-T
Distribution Transformers
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

** Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Distribution Transformers

 

Distribution Transformer type (Data required for liquidimmersed and mediumvoltage drytype on or after January 1, 2010 only)

Lowvoltage drytype; liquid immersed; mediumvoltage drytype

*Phase

1, 3

kVa (BIL kVa for mediumvoltage dry type)

 

Rated Output Power

 

Total Loss Power

 

Efficiency (for mediumvoltage models, this will be the Efficiency at 2045 kV)

 

Efficiency 2 (medium voltage models only, Efficiency at 4695 kV)

 

Efficiency 3 (medium voltage models only, Efficiency at ≥ 96 kV)

 

* “Identifier” information as described in Section 1602(a).
1 = Voluntary for federally
regulated appliances
2 = Voluntary for state
regulated appliances

Table X-V
Computers, Computer Monitors, Televisions,
Signage Displays, and Consumer Audio and Video Equipment.
Data Submittal Requirements

Appliance

Required Information

Permissible Answers

All Appliances

** Manufacturer’s Name

 

* Brand Name

 

*Model Number

 

Date model to be displayed

 

Regulatory Status

Federallyregulated consumer product, federallyregulated commercial and industrial equipment, nonfederallyregulated

Televisions

 

Type*

CRT, Plasma, LCD, DLP, Rear Projection, Laser, OLED, LCOS

Viewable Screen Area

 

 

Screen Size

 

 

Automatic Brightness

Control

 

True, False

Automatic Brightness Control enabled

True, False

Forced Menu

 

True, False

Native Vertical Resolution

 

 

Aspect Ratio

 

 

Integrated Occupancy Sensor

 

True, False

Lhome

 

Lhigh

 

Luminance Ratio

 

TV StandbyPassive Mode Power (watts)

 

On Mode Power (watts)

 

Retail On Mode Power (watts)

 

Power Factor

 

 

Consumer Audio and Video Equipment

Compact Audio Products

 

Power Usage in Audio StandbyPassive Mode for Models Without a PermanentlyIlluminated Clock Display (watts)

Power Usage in Audio StandbyPassive Mode for Models With a PermanentlyIlluminated Clock Display (watts)

 

Digital Versatile Disc Players and Digital Versatile Disc Recorders

Power Usage in Video StandbyPassive Mode (watts)

 

Computer Monitors

 

Backlight Type

CCFI, LED, OLED, Quantum Dots

EPD

True, False

OLED

True, False

Gaming Monitor w/ Incremental Hardware

True, False

Gaming Monitor w/o Incremental Hardware

True, False

Fast refresh rate gaming monitor

 

True, False

Maximum Refresh Rate (Hz)

 

KMM_KVM

True, False

Very High Performance

True, False

Curved Monitor

True, False

Viewable Screen area (square inches)

 

Screen size (diagonal inches)

 

Automatic Brightness Control

True, False

Automatic Brightness Control Enabled when Shipped

True, False

Screen Luminance (Candelas Per Square Meter)

 

Native resolution (megapixels)

 

Power Draw in On Mode (watts)

 

Power Draw in Computer Monitor Sleep Mode (watts)

 

Power Draw in Computer Monitor Off Mode (watts)

 

Touch Screen Capability

True, False

Touch Screen Enabled in On Mode

True, False

Touch Screen Enabled in Computer Monitor Sleep Mode

True, False

Touch Screen Enabled in Computer Monitor Off Mode

True, False

Color Gamut

>32.9% OF cieluV (99% or more of defined Srgb colors),
>38.4% OF cieluV (99% or more of defined Adobe rgb colors),
<32.9% OF cieluV

Medical Computer Monitor

 

(Other than the identifier information shown under “All Appliances” (e.g., manufacturer name, brand name, model number), no other data is required for medical computer monitors at this time.)

 

Computers

Computer Type

Desktop, Notebook, Small-Scale Server, Workstation, Thin Client, Portable All-In-One, Mobile Gaming System, Mobile Workstation, High Expandability Computer, Rack-mounted Workstation

Operating System Type

None, Limited Capability Operating System, Other

Operating System Type (Provide the operating system used during testing to calculate energy consumption.)

 

Core Speed (gigahertz)

 

Number of CPU Cores

 

CPU Support for 4 or more channels of memory or a 256 bit or greater memory interface

True, False

Number of 3.5” hard-disk drives and Others (other than main storage)

 

Number of 2.5” hard-disk drives (other than main storage)

 

Number of solid state drives (other than main storage)

 

Number of hybrid solid state drives (other than main storage)

 

Nameplate output power of the external power supply (watts) (notebook computers and mobile gaming systems only)

 

Total Battery Capacity (watt-hours) (notebook computers, portable all-in-one, and mobile gaming systems only)

 

Discrete GPU(s) present in system

True, False

First Discrete GPU is packaged on the same substrate as the CPU

True, False

First Discrete GPU Frame Buffer Bandwidth (rounded to nearest gigabyte per second)

 

Total Number of Discrete GPUs

 

Integrated display

True, False
(Note: Units with more than one integrated display must certify related data for each screen)

Multi-screen notebook

 

True, False

Number of integrated screens

 

Color Gamut (if computer has integrated display)

>32.9% OF cieluV (99% or more of defined Srgb colors),
>38.4% OF cieluV (99% or more of defined Adobe rgb colors),
<32.9% OF cieluV

Diagonal screen size (inches) (if computer has integrated display)

 

Viewable screen area (square inches) (if computer has integrated display)

 

Resolution (megapixels) (if computer has integrated display)

 

Enhanced Performance (if computer has integrated display)

True, False

Length of time of user inactivity before computer entering sleep (minutes)
Do not report a number if the model does not enter sleep.

 

Length of time of user inactivity before placing display into sleep (minutes)
Do not report a number if the model does not enter sleep.

 

Notebook computer with Cyclical behavior

True, False

Operation of the notebook computer without a battery pack is a supported configuration when connected to the mains power source

True, False

One complete cycle of battery charging and discharging in computer short-idle mode (hours:minutes:seconds) (Applies only to notebook computers with cyclical behavior where operation without a battery pack is not a supported configuration when connected to the mains power source)

 

Computer short-idle mode test duration (hours:minutes: seconds) (Applies only to notebook computers with cyclical behavior where operation without a battery pack is not a supported configuration when connected to the mains power source)

 

One complete cycle of battery charging and discharging in computer long-idle mode (hours: minutes: seconds) (Applies only to notebook computers with cyclical behavior where operation without a battery pack is not a supported configuration when connected to the mains power source)

 

Computer long-idle mode test duration (hours: minutes: seconds) (Applies only to notebook computers with cyclical behavior where operation without a battery pack is not a supported configuration when connected to the mains power source)

 

One complete cycle of battery charging and discharging in computer sleep mode (hours: minutes: seconds) (Applies only to notebook computers with cyclical behavior where operation without a battery pack is not a supported configuration when connected to the mains power source)

 

Computer sleep mode test duration (hours: minutes: seconds) (Applies only to notebook computers with cyclical behavior where operation without a battery pack is not a supported configuration when connected to the mains power source)

 

One complete cycle of battery charging and discharging in computer off mode (hours: minutes: seconds) (Applies only to notebook computers with cyclical behavior where operation without a battery pack is not a supported configuration when connected to the mains power source)

 

Computer off mode test duration (hours: minutes :seconds) (Applies only to notebook computers with cyclical behavior where operation without a battery pack is not a supported configuration when connected to the mains power source)

 

Wired Ethernet or Fiber Card with a transmit rate of 10 GB/s or greater

True, False

Data transmission rate of wired Ethernet port with a transmit rate of more than 1 Gb/s and less than 10 Gb/s that is not an Add-in card (Gb/s)

 

Energy Efficient Ethernet Capability

True, False

Total Number of Add-in Cards

 

Total Number of Video Surveillance Cards

 

Total Number of Wired Ethernet or Fiber Cards with a transmit rate of 10 GB/s or greater

 

System memory bandwidth (gigabytes/second))

 

8 gigabytes or more of system memory with a bandwidth of 632 GB/s or more

True, False

8 gigabytes or more of system memory with a bandwidth of 432 GB/s or more

True, False

4 gigabytes or more of system memory with a bandwidth of 146 GB/s or more

True, False

4 gigabytes or more of system memory with a bandwidth of 134 GB/s or more

True, False

Total Number of System Memory Channels Used

 

First channel system memory type

DDR, GDDR, HBM, Other, None

First channel system memory bandwidth (GB/s)

 

First channel system memory (GB)