TABLE JA-8. DATA TO BE RECORDED AND SUBMITTED TO THE CALIFORNIA ENERGY COMMISSION
|
Required Information
|
Permissible Answers
|
Compliance Threshold
|
|
Manufacturer, Model number, Description
|
||
|
Light Source Type
|
LED, OLED, Fluorescent, HID, Incandescent, Other
|
|
|
Product type
|
Omnidirectional lamp, Directional lamp, Decorative lamp, LED light engine, inseparable SSL luminaire, T20 lamp, other
|
|
|
Lab accredited by NVLAP or accreditation body operating in accordance with ISO/IEC 17011?
|
Yes/No
|
Yes
|
|
Initial Luminous Efficacy
|
Value (lumens/Watt)
|
≥ 45 lumens/Watt
|
|
Power Factor at Full Rated Power
|
0 – 1 Fraction
|
≥ 0.90
|
|
Start time
|
Value (seconds)
|
≤ 0.5 sec
|
|
Correlated Color Temperature (CCT)
|
Number Kelvin
|
≤4000 Kelvin.
|
|
Color Rendering Index (CRI)
|
0-100
|
≥ 90 for all products other than T20 lamps, ≥ 82 for T20 lamps
|
|
Color Rendering R9 (red)
|
0-100 or below 0
|
≥ 50 for all products other than T20 lamps
|
|
Ambient or elevated temperature
|
Ambient or Elevated
|
|
|
Minimum dimming level
|
Value (percent)
|
≤ 10%
|
|
Dimming control compatibility
|
Forward Phase cut control, reverse phase cut, powerline carrier, digital, 0-10 VDC, other.
|
At least one type must be listed
|
|
NEMA SSL 7A compatible?
|
Yes/No, NA
|
If compatible with forward phase cut dimmer control, “Yes”. If not, “NA”.
|
|
Flicker:
|
Flicker:
|
Flicker:
|
|
See JA10 Table 10-1 for flicker data requirements and permissible answers
|
<30% for frequencies of 200 Hz or below, at 100% light output
|
|
|
See JA10 Table 10-1 for flicker data requirements and permissible answers
|
<30% for frequencies of 200 Hz or below, at 20% light output
|
|
|
Audible Noise:
|
Audible Noise:
|
Audible Noise:
|
|
100% light output: Audible Noise
|
Value (dBA)
|
≤ 24 dBA
|
|
20% light output: Audible Noise
|
Value (dBA)
|
≤ 24 dBA
|
|
Marking:
|
Marking:
|
Marking:
|
|
Marked in accordance with JA8.5
|
Yes/No
|
Yes
|