Residential and Nonresidential Energy Efficiency Concepts
This course describes the benefits, principles, and underlying science of energy-efficient buildings, including: energy terminology and units of measure, heat-flow principles, causes and methods of controlling building heat transfer, and energy consumption and efficiency of building envelope, heating and cooling, water heating, and lighting systems as well as plug loads.
2019 Title 24, Part 6: Where We’re Headed With the Nonresidential Standards
The 2019 Title 24, Part 6 Building Energy Standards for Nonresidential Buildings, scheduled to take effect on January 1, 2020, include numerous changes, including extending the scope of Part 6 to healthcare facilities, revising ventilation and lighting requirements, among them updating prescriptive indoor and outdoor lighting power allowance values to assume the use of LED lighting, plus revisions to HVAC and acceptance test requirements.
Martyn Dodd will summarize the new and revised requirements in the 2019 standards for nonresidential and high-rise residential buildings and direct participants to informational and training resources that provide more in-depth Title 24, Part 6 information. Architects, engineers, lighting designers, energy consultants, contractors, and building department staff should find this training of interest and directly applicable to their work. Participants will benefit if they have some background on California’s Title 24, Part 6 Building Energy Standards.
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
2019 Title 24, Part 6: Where We’re Headed With the Residential Standards
The 2019 Title 24, Part 6 Building Energy Standards for Residential Buildings, scheduled to take effect on January 1, 2020, include numerous changes. The biggest changes center upon new prescriptive requirements for installation of solar photovoltaic systems in newly constructed residential buildings and specification of use of an Energy Design Rating in the performance approach to compliance to support solar photovoltaic requirements. There are also changes to requirements for ventilation, wall u-factor, fenestration, water heating, and residential HVAC among others.
Martyn Dodd will summarize the new and revised requirements in the 2019 standards for residential and low-rise multifamily buildings and direct participants to informational and training resources that provide more in-depth Title 24, Part 6 information. Architects, energy consultants, contractors, and building department staff should find this training of interest and directly applicable to their work. Participants will benefit if they have some background on California’s Title 24, Part 6 Building Energy Standards.
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
Residential CEA Exam Preparation Workshop
This full-day workshop will focus on preparing candidates to take the multiple-choice and modeling portions of the Residential Certified Energy Analyst (CEA) exam administered through CABEC. The workshop includes key information about how the exam was developed, exam competencies and objectives, sample questions, study resources and exam-taking tips. This workshop will also include hands-on modeling of a sample project, including strategies for project assessment, gathering and organizing plan take-offs, and identifying common modeling mistakes.
Note: Participants are encouraged to bring laptop computers with the most current version of the compliance software and be prepared to use it.
There are currently no classes scheduled for this topic.
Nonresidential CEA Exam Preparation Workshop
This full-day workshop will focus on preparing candidates to take the multiple-choice and modeling portions of the Nonresidential Certified Energy Analyst (CEA) exam administered through CABEC. The workshop includes key information about how the exam was developed, exam competencies and objectives, sample questions, study resources and exam-taking tips. This workshop will also include hands-on modeling of a sample project, including strategies for project assessment, gathering and organizing plan take-offs, and identifying common modeling mistakes.
Note: Participants are encouraged to bring laptop computers with the most current version of the compliance software and be prepared to use it.
There are currently no classes scheduled for this topic.
Title 24: Where We're Headed with the 2019 Standards
The 2019 Title 24 Building Energy Standards will be more stringent than prior versions as we move closer to ZNE. The new standards are intended to reduce peak energy consumption and slow the growth in demand for electricity and natural gas in California. Martyn Dodd will summarize the new and revised requirements in the 2019 standards for residential, nonresidential and high-rise residential buildings and direct participants to informational and training resources that provide more in-depth Title 24 information. Architects, engineers, lighting designers, energy consultants, contractors, and building department staff should find this training of interest and directly applicable to their work.
There are currently no classes scheduled for this topic.
Introduction to CBECC-Res Energy Modeling Software for Residential Buildings
This full-day training covers the basics of CBECC-Res energy modeling software for compliance with the 2019 Title 24, Part 6 Residential Energy Standards. This class is intended for those with little or no experience with CBECC-Res software and will cover basic inputs required to create energy models and compliance documentation for new construction residential projects. Participants will experience hands-on modeling of a sample project, including strategies for project assessment, gathering and organizing plan take-offs, and reviewing the compliance documentation for accuracy.
Note: Participants are encouraged to bring laptop computers with the most current version of the CBECC-Res compliance software and be prepared to use it.
There are currently no classes scheduled for this topic.
Decoding QII: Let’s Talk What’s Coming for HERS Quality Insulation Installation
Gina Rodda of Gabel Energy along with her guest speaker Russ King, from CalCERTS, want you to join the conversation on HERS-verified Quality Insulation Installation (QII) process, and how it will Impact your role in the residential construction process. Discussion topics include: Examples of how to integrate QII into design documents so that the project starts off RIGHT; How scheduling is vital to successful, and cost-effective, project completion using QII; Tips on how to get a final occupancy permit for QII features, including the critical field inspection process with the HERS rater, contractor(s) and Building Inspector; How to determine the QII procedures for the 2016 code and the 2019 code
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
Advanced CBECC-Res Energy Modeling Software for Residential Buildings
This full day training covers advanced uses of CBECC-Res energy modeling software for compliance with the 2019 Title 24, Part 6 Residential Energy Standards. This class is intended for those with intermediate experience with CBECC-Res software and will cover advanced inputs required to create energy models and compliance documentation for new construction residential projects and Existing + Addition/Alteration (E+A+A) projects. Participants will experience strategies for modeling unconventional assemblies, alternate mechanical systems, solar PV and solar thermal systems, and hands-on modeling of a sample E+A+A project, including strategies for project assessment, gathering and organizing plan take-offs, and reviewing the compliance documentation for accuracy. Prerequisite:Introduction to CBECC-Res
There are currently no classes scheduled for this topic.
Decoding What’s New: Let’s Talk 2019 Title 24, Part 6 - Residential
Gina Rodda of Gabel & Associates, LLC, along with her guest speaker Martyn Dodd of Energy Soft, want you to join the conversation about the new 2019 energy code requirements for California’s Title 24, Part 6. Due to popular demand, we will be offering Residential and Nonresidential as separate sessions. You may choose to register for BOTH sessions.
Both sessions will cover: Challenges of designing to, modeling and enforcing these new code requirements; Opinions on how they will affect compliance options used.
Residential session will also explore new PV requirements as well as building efficiency changes.
Nonresidential session will also review: Changes to lighting power densities; New mechanical ventilation requirements; Lab hood changes and much more.
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
Decoding What’s New: Let’s Talk 2019 Title 24, Part 6 - Nonresidential
Gina Rodda of Gabel & Associates, LLC, along with her guest speaker Martyn Dodd of Energy Soft, want you to join the conversation about the new 2019 energy code requirements for California’s Title 24, Part 6. Due to popular demand, we will be offering Residential and Nonresidential as separate sessions. You may choose to register for BOTH sessions.
Both sessions will cover: Challenges of designing to, modeling and enforcing these new code requirements; Opinions on how they will affect compliance options used.
Residential session will also explore new PV requirements as well as building efficiency changes.
Nonresidential session will also review: Changes to lighting power densities; New mechanical ventilation requirements; Lab hood changes and much more.
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
2019 Title 24, Part 6 Essentials on Demand - Residential Standards & Technology: Water Heating
This course provides Energy Consultants with a robust look at the requirements and considerations for recommending residential water heating system features that will help a residential project meet or exceed the 2019 Energy Code requirements for new construction and alterations.
2019 Title 24, Part 6 Essentials on Demand - Residential Standards & Technology: Building Envelope
This course is designed to help Energy Consultants identify 2019 Energy Code Mandatory and Prescriptive requirements for residential envelope, identify strategies for improving the energy efficiency performance of the envelope based on Climate Zone characteristics and advise clients on product specifications necessary for compliance.
2019 Title 24, Part 6 Essentials on Demand — Residential Standards & Technology: Heating, Ventilation, and Air Conditioning
This course provides Energy Consultants with a robust look at the requirements and considerations for recommending HVAC system features that will help a residential project meet or exceed the 2019 Energy Code requirements for new construction and alterations.
2019 Title 24, Part 6 Essentials — Residential Standards: Lighting
This interactive, "hands-on" course is designed to provide those who design, specify, and/or inspect lighting installations in new and remodeled residential spaces with the knowledge and skills needed to perform key tasks associated with residential Title 24 building energy efficiency compliance. Topics include an overview of current lighting technologies that are available to fulfill code requirements.
Available CEUs
ICC; CABEC
2019 Title 24, Part 6 Essentials on Demand - Residential Standards & Technology: Solar Systems
This course focuses on what Energy Consultants need to know to understand and apply solar ready requirements for low-rise mulitfamily and single family residential buildings under California's 2019 Energy Code.
2019 Title 24, Part 6 Essentials on Demand — Residential Standards: Ventilation
This course aims to provide the knowledge necessary to understand and apply ventilation requirements for low-rise and single-family residential buildings under California's 2019 Building Energy Standards (Title 24, Part 6). Designers, contractors, energy consultants, HERS raters and building department staff will benefit from this course.
Decoding 2019 Title 24, Part 6: Let’s Talk Healthcare Facilities
Gina Rodda of Gabel & Associates, LLC, along with her guest speaker Ted Tiffany of Guttmann & Blaevoet Consulting Engineers, want you to join the conversation regarding how healthcare facilities (occupancy I-2) are now subject to the requirements of Title 24, Part 6 (the Energy Code).
Join us as we review how healthcare facilities will need to be designed, documented and verified to show compliance with the 2019 Energy Code, when occupancy I-2 will no longer be exempt.
We will discuss: The format, code triggers and building features associated with the Energy Code; Understanding the exceptions included in the Energy Code specific to healthcare buildings; How to be successful in modeling healthcare facilities using compliance software; and Documenting compliance for OSHPD submittal (Certificate of Compliance), during construction (Certificate of Installation) and for verification (Certificate of Acceptance) applicable to healthcare buildings.
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
Video Walkthrough of the 2019 NRCC-ELC-E Dynamic Form
For the 2019 Energy Code cycle, the Nonresidential Certificate of Compliance (NRCC) Forms have been simplified so there is only one NRCC per compliance category. In order to do so, each NRCC has been outfitted with dynamic features that allow it to react to user input in real time, also known as a Dynamic Form. In this short video, we walk you through the basic features of the electrical power distribution form including where to find it, how a dynamic form functions, how to sign and add the completed form to your plan set, and much more.
2019 Title 24, Part 6 Essentials — Nonresidential Standards for Architects & Designers
This course is designed to help nonresidential architects and designers advance their understanding of California’s 2019 Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code) and ease Energy Code implementation.
The course offers a clear roadmap of the compliance process, including how to administer and coordinate with the design team and energy consultant, and it provides guidance on the Energy Code requirements for commissioning and design review, envelope, daylighting and solar ready design.
The online live version of this course is delivered in two half-day sessions held on two consecutive days. Participants must attend both sessions to complete the course.
The traditional classroom (in-person) version of this course is delivered as one full day of training.
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming5/17/2021
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming9/1/2021
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming11/10/2021
2019 Title 24, Part 6 Essentials — Residential Standards for HVAC Contractors
This course is designed to help residential HVAC contractors standout from the competition, and help their customers stay cool and save money by complying with the 2019 Title 24, Part 6 building Energy Code. It addresses when the Code does and does not apply to a residential HVAC project, which requirements are triggered when you're just changing part of the system, when you need to involve a HERS Rater and what compliance forms the building department will require.
There are currently no classes scheduled for this topic.
2019 Title 24, Part 6 Essentials — Nonresidential Standards: Indoor Lighting
Join us for this course designed to provide those who design, specify and/or inspect indoor lighting installations in new and remodeled nonresidential spaces with the knowledge and skills needed to perform key tasks associated with Title 24, Part 6 building Energy Code compliance. During the course you will look at how the requirements may differ when they apply to lighting alteration projects, using tools and resources available through Energy Code Ace.
There are currently no classes scheduled for this topic.
2019 Title 24, Part 6 Essentials — Nonresidential: Modeling
This highly interactive online live course addresses general principles and hands-on application for effectively modeling nonresidential new construction and alterations to demonstrate compliance with California’s 2019 Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code).
The course includes examples, demonstrations and individual hands-on practice covering both EnergyPro v. 8 and and CBECC-Com v. 2019.
Note that this is a “virtual” class (v-class) and is delivered in three parts held on three consecutive mornings. You need to attend all three parts to complete the course.
Part One addresses what’s changed in modeling compared to the 2016 code cycle, how to assess a project and prepare for data entry as well as considerations for modeling the building envelope. Part Two explores how to interpret the results from an envelope modeling run as well as how to model nonresidential lighting and interpret the results. Part Three focuses on zoning the model for HVAC, interpreting the results of a Mechanical run and identifying recommended improvements for a project.
Available CEUs
ICC:0.9; AIA:9
Guest Speaker
Ted Tiffany
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming5/25/2021
Available CEUs
ICC:0.9; AIA:9
Guest Speaker
Ted Tiffany
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming8/24/2021
Available CEUs
ICC:0.9; AIA:9
Guest Speaker
Ted Tiffany
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 1:00 pm - 4:00 pm, PST.
Registration link coming10/26/2021
2019 Title 24, Part 6 Essentials — Residential Standards for Plans Examiners & Building Inspectors
This interactive, "hands-on" course is designed to provide Plans Examiners and Building Inspectors with the knowledge and skills needed to more quickly and effectively enforce the Energy Code for residential projects. Course Objectives include: Identify Residential construction's "top six" areas of typical greatest impact on Energy Code compliance; Identify "essential" Plans Examiner and Building Inspector review tasks associated with top Energy Code compliance categories, and describe how review strategy shifts based on project type (Performance vs Prescriptive; New Construction vs Additions vs Alterations); Use given Plans Examiner and Building Inspector checklists to guide review, and identify where checklist line items correspond to compliance documentation, Plan Set drawings, and observed on-site conditions; Use Plans Examiner and Building Inspector Checklists and task prioritization strategies to perform a plan check or building inspection that is appropriate given your time available, realities on the job, & goals of Title 24, Part 6; Practice ways to address non-compliance, as well as methods for communicating effectively, during plan check and building inspection phases.
There are currently no classes scheduled for this topic.
Click here to request training for this topic.
Title 24, Part 6 Essentials – Nonresidential Lighting Standards: Comparing 2019 to 2016 Requirements
This intermediate class is for professionals who design, specify, install and/or inspect lighting installations in new and remodeled buildings. Join us to: Gain an understanding of current (2016) Energy Code requirements for indoor, outdoor and sign lighting under Title 24, Part 6, and what is changing for the next code cycle (2019, effective January 1, 2020); Review lighting-related measures in the 2016/2019 Energy Code for nonresidential occupancies; Use the Energy Code Ace “Nonresidential Lighting Wheel” as a tool for understanding the control requirements and options; Effectively apply the Energy Code requirements specific to new and altered indoor, outdoor and sign lighting projects; Access resources through utility and lighting technology training centers for continued professional development
There are currently no classes scheduled for this topic.
2019 Title 24, Part 6 Essentials — Residential Standards for Energy Consultants
This course is designed to provide energy analysts with the knowledge and skills needed to perform key tasks associated with California’s 2019 Residential Building Energy Efficiency Standards (Energy Code or Title 24, Part 6). Activities and information presented in the class help energy consultants identify compliance options and considerations for different kinds of residential projects, ensure the appropriate compliance documentation is prepared for permit submittal and effectively communicate compliance options, requirements and recommendations to builders and clients. Course Objectives: Identify major differences between the 2016 and 2019 California Residential Building Energy Efficiency Standards; Identify requirements for residential new construction, additions and alterations; Describe the residential compliance forms and related documents; Communicate energy efficiency compliance options and requirements to builders and clients; Make recommendations for improving a building’s compliance margin, balancing cost, schedule, practicality, availability and other relevant considerations
Available CEUs
ICC:0.9; AIA:9
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming6/7/2021
Available CEUs
ICC:0.9; AIA:9
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming8/3/2021
2019 Title 24, Part 6 Essentials — Nonresidential Standards for Plans Examiners & Building Inspectors
This interactive, "hands-on" course is designed to provide Plans Examiners and Building Inspectors with the knowledge and skills needed to more quickly and effectively enforce California’s 2019 Building Energy Efficiency Standards (Energy Code or Title 24, Part 6) for nonresidential projects.Course Objectives: Identify nonresidential construction's top areas of typical greatest impact on 2019 Energy Code compliance; Identify "essential" Plans Examiner and Building Inspector review tasks associated with top 2019 Nonresidential Energy Code compliance categories, and describe how review strategy shifts based on project type (Performance vs. Prescriptive; New Construction vs. Additions vs. Alterations); Use given Plans Examiner and Building Inspector Nonresidential checklists to guide review, and identify where checklist line items correspond to compliance documentation, Plan Set drawings and observed on-site conditions; Use Plans Examiner and Building Inspector Nonresidential Checklists and task prioritization strategies to perform a plan check or building inspection that is appropriate given your time available, realities on the job and goals of the 2019 Nonresidential Energy Code; Practice ways to address noncompliance, as well as methods for communicating effectively, during plan check and building inspection phases
There are currently no classes scheduled for this topic.
Click here to request training for this topic.
2019 Title 24, Part 6 Essentials — Residential: Modeling
This highly interactive course addresses general principles and hands-on application for effectively modeling residential new construction and alterations to demonstrate compliance with California’s 2019 Residential Building Energy Efficiency Standards (Energy Code or Title 24, Part 6). The course includes examples, demonstrations and individual hands-on practice covering both EnergyPro v. 8 and CBECC-Res v. 2019. Course Objectives include: Scope a residential project, calculating and organizing the information needed to model the project to demonstrate compliance with California's 2019 Residential Building Energy Efficiency Standards (Title 24, Part 6 or the Energy Code); Structure the residential project model and enter data, using the Standard Design as a reference to evaluate the Proposed Design relative to compliance with the 2019 Residential Energy Code; Review the reports and compliance documentation from a modeling run to identify anomalous results and data entry errors; Based on the modeling results, make recommendations for modifying the building envelope, mechanical, and/or lighting systems in order to bring the project into compliance with the 2019 Residential Energy Code.
Available CEUs
ICC:0.9; AIA:9
Guest Speaker
Ted Tiffany
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Available CEUs
ICC:0.9; AIA:9
Guest Speaker
Ted Tiffany
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming7/20/2021
Available CEUs
ICC:0.9; AIA:9
Guest Speaker
Ted Tiffany
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming9/14/2021
2019 Title 24, Part 6 Essentials — Residential Standards: Envelope & Solar Systems
This "roll-up-your-sleeves" interactive session can help you make appropriate recommendations regarding walls, attics, fenestration and shading, and documenting solar systems for residential projects within the context of project requirements and client preferences. Course Objectives include: Select the high-performance attic (HPA) assembly that is most appropriate for a given project and climate zone and considering client preferences and priorities; Determine the Mandatory measures and Prescriptive requirements for alternative residential addition project involving mass walls; Determine the requirements for the Solar Photovoltaic (PV) area for a low-rise single-family new construction project; Identify the values to be entered into a residential performance model for fixed shading (overhang and side fin) of fenestration.
Available CEUs
ICC:0.3; AIA:3
Registration link coming4/27/2021
Available CEUs
ICC:0.3; AIA:3
Registration link coming7/13/2021
Available CEUs
ICC:0.3; AIA:3
Registration link coming10/19/2021
2019 Title 24, Part 6 Essentials — Residential: Analyzing the CF1R
This "roll-up-your-sleeves" interactive session provides energy analysts with a conceptual framework for predicting how project features will affect a residential project's compliance margin and for confirming the accuracy of the CF1R relative to the As-Designed project and troubleshooting unexpected results.
Course objectives include: Describe the components of the CF1R and the information they convey; Determine the measures that are most likely to have the greatest impact on a given project’s compliance and predict how project features will affect the compliance margin and project performance; Use simulation results to confirm accuracy and troubleshoot issues related to both compliance and model accuracy; Explain how the Standard Design that sets the energy budget for the proposed building is established based on the modeled envelope, HVAC and water heating.
Course Prerequisites: Basic familiarity with California’s 2019 Building Energy Efficiency Standards (Energy Code or Title 24, Part 6) (If don’t have this understanding, take v-class: 2019 Title 24, Part 6 Essentials — Residential Standards for Energy Consultants); Basic familiarity with the role of the CF1R and how it’s produced (If don’t have this knowledge, take v-class: 2019 Title 24, Part 6 Essentials — Residential Standards for Energy Consultants OR v-class: 2019 Title 24, Part 6 Essentials — Residential: Modeling OR both ); v-class: 2019 Title 24, Part 6 Essentials — Residential: Modeling (recommended; not required)
Available CEUs
ICC:0.3; AIA:3
Available CEUs
ICC:0.3; AIA:3
Registration link comingJune 29
Available CEUs
ICC:0.3; AIA:3
Registration link comingOctober 4
2019 Title 24, Part 6 Essentials — Nonresidential Standards for Energy Consultants
This course is designed to provide energy analysts with the knowledge and skills needed to perform key tasks associated with California’s 2019 Nonresidential Building Energy Efficiency Standards (Energy Code or Title 24, Part 6). Activities and information presented in the class help energy consultants identify compliance options and considerations for different kinds of nonresidential projects, ensure the appropriate compliance documentation is prepared for permit submittal and effectively communicate compliance options, requirements and recommendations to builders and clients.
Course objectives include: Identify major differences between the 2016 and 2019 California Nonresidential Building Energy Efficiency Standards; Identify requirements for nonresidential new construction, additions and alterations; Describe the nonresidential compliance forms and related documents; Communicate energy efficiency compliance options and requirements to builders and clients; Make recommendations for improving a building’s compliance margin, balancing cost, schedule, practicality, availability and other relevant considerations.
Available CEUs
ICC:0.9; AIA:9
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming5/25/2021
Available CEUs
ICC:0.9; AIA:9
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming9/8/2021
Available CEUs
ICC:0.9; AIA:9
Sessions
Note that the v-class is delivered in 3 parts over 3 consecutive days, all of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming11/17/2021
2019 Title 24, Part 6 Essentials — Nonresidential: Introduction to Modeling
This is a three-hour online "virtual-classroom" training experience that answers the question: “Why bother with the modeling to demonstrate compliance with the California’s 2019 Nonresidential Building Energy Efficiency Standards (Energy Code or Title 24, Part 6)?” This course does NOT address how to use modeling software or include any hands-on work with the software. Rather, it is designed for individuals who are uncertain of the important role that modeling can play in complying with the Energy Code. Specifically, it illustrates the benefits of using the Performance Approach to compliance and how approved modeling software lets you avoid selected Prescriptive requirements by making trade-offs between building features that are “better and worse” than Prescriptive.
Course objectives include: Compare the Prescriptive and Performance approaches to compliance with the 2019 Energy Code; Describe, in general terms, how Performance modeling works and what it produces; Use the Standards Joint Appendix JA4 to determine how alternative wall assemblies compare to residential Prescriptive requirements of the 2019 Energy Code; Given an example residential project, identify a set of “trade-offs” among measures that likely will comply with the 2019 Energy Code using the Performance approach
Available CEUs
ICC:0.3; AIA:3
Registration link coming4/26/2021
Available CEUs
ICC:0.3; AIA:3
Registration link coming7/26/2021
Available CEUs
ICC:0.3; AIA:3
Registration link coming9/27/2021
2019 Title 24, Part 6 Essentials — Residential: Introduction to Modeling
This is a three-hour online "virtual-classroom" training experience that answers the question: “Why bother with the modeling to demonstrate compliance with the California’s 2019 Residential Building Energy Efficiency Standards (Energy Code or Title 24, Part 6)?” This course does NOT address how to use modeling software or include any hands-on work with the software. Rather, it is designed for individuals who are uncertain of the important role that modeling can play in complying with the Energy Code. Specifically, it illustrates the benefits of using the Performance Approach to compliance and how approved modeling software lets you avoid selected Prescriptive requirements by making trade-offs between building features that are “better and worse” than Prescriptive. Course objectives include: Compare the Prescriptive and Performance approaches to compliance with the 2019 Energy Code; Describe, in general terms, how Performance modeling works and what it produces; Use the Standards Joint Appendix JA4 to determine how alternative wall assemblies compare to residential Prescriptive requirements of Title 24, Part 6; Given an example residential project, identify a set of “trade-offs” among measures that likely will comply with the Energy Code using the Performance approach
Available CEUs
ICC:0.3; AIA:3
Registration link coming5/31/2021
Available CEUs
ICC:0.3; AIA:3
Registration link coming8/31/2021
Available CEUs
ICC:0.3; AIA:3
Registration link coming10/18/2021
2019 Title 24, Part 6 Essentials — Residential: Modeling Tips
Through demonstration, hands-on practice with sample files and team activities, this three-hour course provides a deep dive into specific techniques for modeling HERS measures for compliance credit, important envelope features, common and alternative mechanical systems and photovoltaic (PV) systems.
Course objectives include: Discuss the implications of using HERS-verified measures in a residential project and how to model verified existing conditions; Apply recommended techniques for modeling residential envelope including elimination of geometry errors from models, selecting and modeling high-performance attics and walls and determining appropriate methods of modeling different dwelling configurations (single-family with one model, single-family with two models, multifamily with single model); Apply recommended techniques for modeling residential mechanical systems including considerations for modeling whole-house fans, alternative systems for heating and water heating and how to select and model efficient water heating approaches; Apply recommended techniques for modeling a photovoltaic (PV, solar) system in a residential building.
This course is designed for professionals who already have basic competence with residential modeling software used to demonstrate compliance with California’s Building Energy Efficiency Standards (Energy Code), Title 24, Part 6.
Available CEUs
ICC:0.3; AIA:3
Registration link coming4/29/2021
Available CEUs
ICC:0.3; AIA:3
Registration link coming6/15/2021
Available CEUs
ICC:0.3; AIA:3
Registration link coming9/30/2021
2019 Title 24, Part 6 Essentials — Residential Standards: Mechanical Systems
This highly interactive workshop gives participants a chance to work individually and in teams to do a deep dive on key residential mechanical systems and features in the context of compliance with California’s Building Energy Efficiency Standards (Energy Code), Title 24, Part 6 as well as client goals and preferences. Participants have an opportunity to weigh the pros and cons of alternative approaches to achieving energy efficiency and meeting the code, selecting the approach that makes best sense to them given the project parameters.
Specific topics explored include methods for improving energy performance of mixed fuel and all electric HVAC systems, when and how alternative HVAC systems (evaporative cooling, ductless mini-split, radiant in-floor, heat pump) make the best sense for a given project, the pros, cons and considerations of three whole-house ventilation strategies and considerations for alternative residential water heating systems.
Available CEUs
ICC:0.3; AIA:3
Instructor
Chandra Apperson
Available CEUs
ICC:0.3; AIA:3
Instructor
Chandra Apperson
Registration link coming7/27/2021
Available CEUs
ICC:0.3; AIA:3
Instructor
Chandra Apperson
Registration link coming9/23/2021
2019 Title 24, Part 6 Essentials - EnergyPro Software for Residential Compliance - Intermediate/Advanced
This half-day course addresses experienced users’ common questions and demonstrates how to use EnergyPro software effectively software for compliance with the 2019 Residential California Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code).
This course is intended for those with experience using EnergyPro for Residential projects that need to comply with the Energy Code. The instructor, Martyn Dodd, solicits questions from class participants, groups these questions into categories and answers as many questions as possible in the allotted class time.
Available CEUs
ICC:0.35; AIA:3.5
Registration link coming6/10/2021
Available CEUs
ICC:0.35; AIA:3.5
Registration link coming9/20/2021
2019 Title 24, Part 6 Essentials - EnergyPro Software for Residential Compliance - Introduction
This half-day course covers the basics of EnergyPro software when used to document compliance with the 2019 Residential California Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code). It covers the basic inputs required to create a model for compliance documentation.
This course is intended for those with little or no experience with EnergyPro software, but does assume basic knowledge of the Energy Code, the Residential compliance process and basic residential modeling inputs such as building envelope details, electric lighting and HVAC systems.
Available CEUs
ICC:0.35; AIA:3.5
Registration link coming6/10/2021
Available CEUs
ICC:0.35; AIA:3.5
Registration link coming9/20/2021
2019 Title 24, Part 6 Essentials - EnergyPro Software for Nonresidential Compliance - Introduction
This class is designed for people new to EnergyPro software. During this class we will introduce participants to the basic input and modeling requirements to document commercial building envelope, lighting and mechanical systems with the 2019 Nonresidential California Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code). Participants in this workshop will be provided the opportunity to practice hands-on using the latest version of EnergyPro.
Topics slated for discussion include:
• Modeling of Construction Assemblies using the Joint Appendix IV Tables
• Modeling Fenestration U-Factors and SHGCs using NRFC procedures
• Modeling Fenestration U-Factors and SHGCs using CEC default tables
• Procedures for describing the basic building envelope
• Utilization of Overhangs and Sidefins to reduce solar gains
• Modeling procedures for the Cool Roof requirements
• Basic Modeling of Lighting Fixture technology
• Lighting Control strategies to save energy
• Indoor Lighting Title 24 requirements.
• Basic procedures for modeling single zone systems.
• Utilization of the CEC Equipment Directories Database in EnergyPro
• How to get started with zoning a building
• Load Calculations and how to properly size a mechanical system
Available CEUs
ICC:0.35; AIA:3.5
Registration link coming6/28/2021
Available CEUs
ICC:0.35; AIA:3.5
Registration link coming9/21/2021
2019 Title 24, Part 6 Essentials - EnergyPro Software for Nonresidential Compliance - Intermediate/Advanced
This half-day course addresses experienced users’ common questions and demonstrates how to use EnergyPro software effectively software for compliance with the 2019 Nonresidential California Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code).
This course is intended for those with experience using EnergyPro for Nonresidential projects that need to comply with the Energy Code. The instructor, Martyn Dodd, will solicit questions from class participants, group these questions into categories and answer as many questions as possible in the allotted class time.
Available CEUs
ICC:0.35; AIA:3.5
Registration link comingJune 28
Available CEUs
ICC:0.35; AIA:3.5
Registration link coming9/21/2021
Decoding EnergyPro: Let’s Talk Updates for 2019 Code - Residential
Gina Rodda of Gabel Energy, along with her guest speaker Martyn Dodd of Energy Soft, want you to join the conversation on how EnergyPro 8 has been updated to support 2019 Energy Code modeling features and requirements, and how they will be documented in the Certificate of Compliance (CF1R/NRCC). This course focuses on residential compliance (single family, duplexes, low-rise townhomes and multifamily). We also offer a companion course focusing on nonresidential compliance (nonresidential, hotel/motel and high-rise multifamily). These Decoding Talks are intended for individuals who have a working knowledge of EnergyPro and are not geared towards beginners.
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
Decoding EnergyPro: Let’s Talk Updates for 2019 Code - Nonresidential
Gina Rodda of Gabel Energy, along with her guest speaker Martyn Dodd of Energy Soft, want you to join the conversation on how EnergyPro 8 has been updated to support 2019 Energy Code modeling features and requirements, and how they will be documented in the Certificate of Compliance (CF1R/NRCC). This course focuses on nonresidential compliance (nonresidential, hotel/motel and high-rise multifamily). We also offer a companion course focusing on residential compliance (single family, duplexes, low-rise townhomes and multifamily). These Decoding Talks are intended for individuals who have a working knowledge of EnergyPro and are not geared towards beginners.
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
Code & Coffee: Residential Modeling – 2019 Energy Code New Construction Project using EnergyPro 8
This episode of Code & Coffee focuses on residential building performance modeling for compliance with California's 2019 Energy Code. The host Brian Selby will demonstrate how to update an existing 2016 Energy Code new construction model for compliance with the 2019 Energy Code using EnergyPro version 8. Key topics include adding a solar PV system and battery storage, updating envelope, HVAC and DWH system measures, reviewing the new EDR compliance metric and checking the CF1R for accuracy.
2019 Residential & Nonresidential Energy Compliance: Let’s Talk About HERS Measures
This half-day session is designed to provide architects, designers, contractors and energy consultants with an intermediate knowledge and skill set on how on the HERS-verified energy features are either required as a mandatory measure, or as an option in showing energy compliance via the performance method, for both residential and nonresidential buildings. We will discuss how various HERS measures affect the design, specifications, construction process, installed features and scheduling of a project.
There are currently no classes scheduled for this topic.
2019 Residential Energy Compliance: Let’s Talk About Design to Construction
This half-day session is designed to provide architects, designers, contractors and energy consultants with an intermediate knowledge and skill set to navigate residential energy compliance documentation and how they should be used to support the design drawings/specifications. Understanding high performance walls and attics, photovoltaics (PV), quality insulation installation (QII), and other HERS verification requirements affect design documentation is essential in being successful in this current 2019 Energy Code cycle. Participants will receive guidance on how and when to integrate code compliance tasks into their project schedule and looks at how Architects/Designers can best support the promises made in the energy compliance documents for the permit submittal and construction phases of a residential project.
There are currently no classes scheduled for this topic.
2019 Residential Energy Compliance: Let’s Talk About Quality Insulation Installation (QII)
This half-day session is designed to provide architects, designers, energy consultants and contractors with an intermediate knowledge and skill set on how on the HERS verified Quality Insulation Installation (QII) process will impact their role throughout the residential construction process. Discussion topics include what QII requires of designers, energy consultants, contractors, HERS raters and plans examiners/field inspectors; scheduling requirements associated with QII; and typical pit falls associated with QII and how to overcome them.
There are currently no classes scheduled for this topic.
2019 Residential & Nonresidential Energy Compliance: Let’s Talk About Renewable Energy
This half-day session is designed to provide architects, designers and energy consultants with an intermediate knowledge and skill set, and tools and resources on how renewables - including photovoltaic (PV), solar thermal water heating and battery storage - are treated in Title 24, Part 6 (Energy Code) for compliance options. Course objectives include: Understanding how building types (single family, multifamily and commercial) dictate when renewables are allowed for compliance with the Energy Code; Applying the current renewable requirements and recognizing how they may, or may not, change for future code cycles; Learning where to find guidance on Energy Code renewable considerations; Understanding strategies for applying renewable energy for Energy Code compliance.
There are currently no classes scheduled for this topic.
2019 Title 24, Part 6 Essentials — Nonresidential Standards for Building Inspectors
This highly interactive virtual course is designed to provide Building Inspectors with the knowledge and skills needed to more quickly and effectively enforce the California Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code) for Nonresidential projects. Course objectives include: Identify Nonresidential construction's "top seven" categories of high-value energy savings and impact on Energy Code compliance; Identify "essential" Building Inspector review tasks associated with top Energy Code compliance categories and describe how review strategy shifts based on project type (Performance vs. Prescriptive; New Construction vs. Additions vs. Alterations); Use the Building Inspector Checklist to guide review and identify where checklist line items correspond to compliance documentation, Plan Set drawings and observed on-site conditions; Use the Building Inspector Checklist and task-prioritization strategies to perform a building inspection that is appropriate given time available, realities on the job and goals of the Energy Code; Practice ways to address non-compliance and communicate effectively during building inspection phases.
The course is delivered in two 3.5-hour sessions over two days. Both sessions need to be attended to complete the course.
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming5/3/2021
Instructor
Marina Chavez-Blanco
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming6/30/2021
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming9/6/2021
Instructor
Marina Chavez-Blanco
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming10/26/2021
2019 Title 24, Part 6 Essentials — Nonresidential Indoor Lighting Controls
This course is intended to help professionals who design, specify, install or inspect lighting installations in new and remodeled Nonresidential spaces as well as Energy Analysts who evaluate California’s 2019 Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code) compliance of proposed lighting designs and manufacturers who supply lighting control devices and systems.
As its name implies, this course focuses on the lighting controls themselves – the types available for Nonresidential indoor lighting scenarios, how are they codified and how they must interact with each other per 2019 Energy Code requirements.
This course is delivered in two three-hour sessions held on two consecutive days. Participants must attend both sessions to complete the course.
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming8/18/2021
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming11/15/2021
2019 Title 24, Part 6 Essentials — Nonresidential Indoor Lighting Compliance Pathways
This course is intended to help professionals who design, specify, install or inspect lighting installations in new and remodeled Nonresidential spaces as well as Energy Analysts who evaluate the California’s 2019 Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code) compliance of proposed lighting designs.
As its name implies, this course focuses on methods for demonstrating lighting compliance via any of up to four Nonresidential indoor lighting pathways (the number of available pathways will vary depending on project type). Appropriateness of, as well as requirements for, given pathways for specific lighting projects will also be explored via deep-dive investigations of each pathway.
This course is divided into two three-hour sessions held on two consecutive days. Participants must attend both sessions to complete the course.
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming5/5/2021
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming7/14/2021
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming10/13/2021
2019 Title 24, Part 6 Essentials — Nonresidential Standards for Plans Examiners
This highly interactive virtual course is designed to provide Plans Examiners with the knowledge and skills needed to more quickly and effectively enforce the 2019 California Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code) for Nonresidential projects. Course objectives include: Identify Nonresidential construction's "top seven" categories of high-value energy savings and impact on Energy Code compliance; Identify "essential" Plans Examiner review tasks associated with top Energy Code compliance categories and describe how review strategy shifts based on project type (Performance vs. Prescriptive; New Construction vs. Additions vs. Alterations); Use the given Plans Examiner Checklist to guide review and identify where checklist line items correspond to compliance documentation, Plan Set drawings; Use the Plans Examiner Checklist and task-prioritization strategies to perform a plan check that is appropriate given time available, realities on the job and goals of the Energy Code; Practice ways to address non-compliance and communicate effectively during plan checks.
This course is delivered in two 3.5-hour sessions over two days. Both sessions need to be attended to complete the course.
Instructor
Marina Chavez-Blanco
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming5/19/2021
Instructor
Marina Chavez-Blanco
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming7/28/2021
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming9/28/2021
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming11/22/2021
2019 Title 24, Part 6 Essentials — Residential Standards for Building Inspectors
This highly interactive virtual course is designed to provide Building Inspectors with the knowledge and skills needed to more quickly and effectively enforce the California Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code) for Residential projects. Course objectives include: Identify Residential construction's "top six" areas of typical greatest impact on Energy Code compliance; Identify "essential" Building Inspector review tasks associated with top Energy Code compliance categories and describe how review strategy shifts based on project type (Performance vs. Prescriptive; New Construction vs. Additions vs. Alterations); Use the Building Inspector Checklist to guide review and identify where checklist line items correspond to compliance documentation, Plan Set drawings and observed on-site conditions; Use the Building Inspector Checklist and task-prioritization strategies to perform a building inspection that is appropriate given time available, realities on the job and goals of the Energy Code; Practice ways to address non-compliance and communicate effectively during building inspection phases.
The course is delivered in two 3.5-hour sessions over two days. Both sessions need to be attended to complete the course.
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming6/3/2021
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming8/9/2021
Instructor
Marina Chavez-Blanco
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming10/6/2021
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming11/24/2021
2019 Title 24, Part 6 Essentials — Residential Standards for Plans Examiners
This highly interactive virtual course is designed to provide Plans Examiners with the knowledge and skills needed to more quickly and effectively enforce the 2019 California Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code) for Residential projects. Course objectives include: Identify Residential construction's "top six" areas of typical greatest impact on Energy Code compliance; Identify "essential" Plans Examiner review tasks associated with top Energy Code compliance categories and describe how review strategy shifts based on project type (Performance vs. Prescriptive; New Construction vs. Additions vs. Alterations); Use the given Plans Examiner Checklist to guide review and identify where checklist line items correspond to compliance documentation and Plan Set drawings; Use the Plans Examiner Checklist and task prioritization strategies to perform a plan check that is appropriate given time available, realities on the job and goals of the Energy Code; Practice ways to address non-compliance communicate effectively during plan checks.
The course is delivered in two 3.5-hour sessions over two days. Both sessions need to be attended to complete the course.
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming6/1/2021
Instructor
Marina Chavez-Blanco
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming8/11/2021
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 8:30 am - Noon, PST.
Registration link coming11/8/2021
Decoding 2019 Alterations: Let’s Talk Nonresidential Indoor Lighting
Gina Rodda of Gabel Energy, along with her guest speaker Mike Hicks, Project Manager at IES, Inc., want you to join the conversation on the choices you have for showing compliance with the 2019 Energy Code for nonresidential indoor lighting alteration projects. Determining a pathway to compliance for these types of projects can be challenging if you don’t understand the triggers and options available, let us help you feel confident in deciding which compliance option is best for your projects.
We will discuss: When a lighting alteration project triggers (and does not trigger) compliance with the Energy Code; Audit tips and tricks supporting compliance pathways to minimize existing lighting control changes; All the compliance pathways available under the alteration requirements of the 2019 Energy Code and the advantages of each approach; and Documenting compliance with the “new” Certificate of Compliance (NRCC-LTI-E); Certificate of Installation (NRCI); and the acceptance testing requirements via the Certificate of Acceptance (NRCA) including the role of a Certified Acceptance Test Technician (ATT)
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
2019 Title 24, Part 6 Essentials — Residential Standards for Architects & Designers
This course is designed to help residential architects and designers advance their understanding of California’s 2019 Building Energy Efficiency Standards (Title 24, Part 6 or Energy Code) and ease Energy Code implementation.
The course offers a clear roadmap of the compliance process, including an integrated design approach with the Design Team and Energy Consultant, as well as training specific to the code requirements for envelope, mechanical, and photovoltaic (solar) design.
The online live version of this course is delivered in two half-day sessions held on two consecutive days. Participants must attend both sessions to complete the course.
The traditional classroom (in-person) version of this course is delivered as one full day of training.
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming6/16/2021
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 1:00 pm - 4:00 pm, PST.
Registration link coming9/8/2021
Available CEUs
ICC:0.6; AIA:6
Sessions
Note that the v-class is delivered in 2 parts over 2 consecutive days, both of which need to be attended to complete the course. Each part runs 9:00 am - Noon, PST.
Registration link coming10/11/2021
2019 Nonresidential CEA Exam Preparation Workshop
This half-day course helps energy consultants prepare to take the both the multiple-choice and the modeling portions of the Nonresidential Certified Energy Analyst (CEA) and Associate Energy Analyst (AEA) exams for the 2019 Energy Code, which are administered through CABEC. The session includes key information about how the exam was developed and exam-taking tips, an overview of exam competencies and objectives, sample questions and study resources for the multiple-choice portion and — for the modeling portion — information how your model will be scored, strategies to help you assess a project for modeling, tips for organizing take-offs and guidance on how to check modeling results for errors and resolve common mistakes.
This class also provides participants with a sample project to complete on your own, including plans, take-offs, and solution model (BLD and RIBD) files.
Guest Speaker
Chandra Apperson
Registration link coming4/23/2021
Guest Speaker
Chandra Apperson
Registration link coming7/23/2021
2019 Residential CEA Exam Preparation Workshop
This half-day course helps energy consultants prepare to take the both the multiple-choice and the modeling portions of the Residential Certified Energy Analyst (CEA) and Associate Energy Analyst (AEA) exams for the 2019 Energy Code, which are administered through CABEC. The session includes key information about how the exam was developed and exam-taking tips, an overview of exam competencies and objectives, sample questions and study resources for the multiple-choice portion and — for the modeling portion — information how your model will be scored, strategies to help you assess a project for modeling, tips for organizing take-offs and guidance on how to check modeling results for errors and resolve common mistakes.
This class also provides participants with a sample project to complete on your own, including plans, take-offs, and solution model (BLD and RIBD) files.
Guest Speaker
Chandra Apperson
Guest Speaker
Chandra Apperson
Registration link coming7/19/2021
2019 Title 24, Part 6 Essentials — Nonresidential Standards: Outdoor Lighting
This course focuses on outdoor lighting controls, and Prescriptive power allowances for both new outdoor lighting projects and alterations. It is designed to help professionals who specify, design, install or inspect outdoor lighting installations in new and remodeled Nonresidential spaces, as well as energy consultants who evaluate the 2019 Title 24, Part 6 (Energy Code) compliance of proposed outdoor lighting designs.
Available CEUs
ICC:0.35; AIA:3.5
Registration link coming6/22/2021
Available CEUs
ICC:0.35; AIA:3.5
Registration link coming9/22/2021
Decoding 2019 Alterations: Let’s Talk Residential HVAC
Gina Rodda of Gabel Energy, along with her guest speaker Bruce Cheney, owner of Anchors Aweigh Energy, want you to join the conversation on Residential HVAC alterations under California’s 2019 Energy Code. Requirements for alterations vary based on the extent of work being done ─ those for simply replacing a furnace are different than those for doing a complete overhaul of the indoor, outdoor and duct systems, for example. We will look at how the Energy Code applies when changing fuel source (natural gas to electric or vice versa) or when remodeling (e.g., kitchen hood and bathroom local exhaust).
Discussion topics include: Triggers associated with heating, ventilation and air conditioning (HVAC) changeouts, upgrades and fuel switching alterations; HERS measures that apply to various scopes of work such as repairing an existing system or replacing an entire HVAC system, including ducting; How remodeling various rooms, such as a kitchen or bathroom, may trigger ventilation requirements; and Documenting compliance via the Certificate of Compliance (CF1R) for all scenarios, and how to use the Project Status Report (PSR) to help manage the installation and verification documentation requirements (CF2R/CF3R)
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
2019 Title 24, Part 6 Residential Standards: HERS-Verified Quality Insulation Installation (QII)
Energy Code Ace & BayREN are pleased to partner in offering a new class on Residential HERS-Verified Quality Insulation Installation (QII).
This hour-long course focuses on Prescriptive quality insulation installation (QII) requirements in the 2019 Energy Code for new low-rise Residential buildings of any size and Additions greater than 700 ft². The webinar helps designers and architects create projects that meet QII; energy consultants clarify the minimum requirements and schedule of inspections when the Certificate of Compliance form (CF1R) calls for QII; contractors coordinate with HERS Raters and subcontractors on inspection dates and other QII requirements; building departments support QII projects at plan check and inspection to ensure the QII process goes smoothly; and HERS Raters communicate with the construction team on how to prepare a project to meet QII requirements during HERS inspections.
There are currently no classes scheduled for this topic.
Decoding Nonresidential Compliance: Let's Talk Virtual Assistance
Gina Rodda of Gabel Energy, along with her guest speaker Sally Blair, Program Director at NORESCO, invite you to join the conversation on how nonresidential project teams can use the new Virtual Compliance Assistant tool from Energy Code Ace to start and finish compliance documents online. Set the scope of work and assign energy compliance tasks during schematic design for the design team, and then use the Virtual Compliance Assistant to assist design considerations for design development. Verify construction documents are good to go then print the Certificate of Compliance forms (NRCC) to submit for permit. Use the project information saved in the Virtual Compliance Assistant to assist submittal review and assign the field compliance documentation requirements (NRCI, NRCA, NRCV) during the construction administrative phase of the project. We will discuss: Tips and tricks on determining how the project’s scope of work determines which compliance forms are required; Common information needed to complete compliance forms; How to break down a project so that selections of New Construction, Addition or Alteration make sense to the project team; and How to get a form that says “Complies” so it can be submitted for permit
There are currently no classes scheduled for this topic. But you can click on the link below to view a recording of a previous session.
Code & Coffee: Nonresidential Prescriptive - NRCC-MCH-E Commercial HVAC Change-out
This episode focuses on documenting compliance on a Commercial HVAC Change-out using the 2019 NRCC-MCH-E dynamic form. The host, Brian Selby, demonstrates how to enter project specific information necessary for completing the Prescriptive NRCC-MCH-E form for a commercial HVAC system change-out.
Video Walkthrough of the 2019 NRCC-CXR-E Dynamic Form
For the 2019 Energy Code cycle the Nonresidential Certificate of Compliance (NRCC) Forms have been simplified so there is only one NRCC per compliance category. In order to do so, each NRCC has been outfitted with dynamic features that allow it to react to user input in real time, also known as a Dynamic Form. In this short video, we walk you through the basic features of the commissioning form including where to find it, how a dynamic form functions, how to sign and add the completed form to your plan set, and much more.
Video Walkthrough of the 2019 NRCC-ENV-E Dynamic Form
For the 2019 Energy Code cycle the Nonresidential Certificate of Compliance (NRCC) Forms have been simplified so there is only one NRCC per compliance category. In order to do so, each NRCC has been outfitted with dynamic features that allow it to react to user input in real time, also known as a Dynamic Form. In this short video, we walk you through the basic features of the envelope form including where to find it, how a dynamic form functions, how to sign and add the completed form to your plan set, and much more.
Video Walkthrough of the 2019 NRCC-LTI-E Dynamic Form
For the 2019 Energy Code cycle the Nonresidential Certificate of Compliance (NRCC) Forms have been simplified so there is only one NRCC per compliance category. In order to do so, each NRCC has been outfitted with dynamic features that allow it to react to user input in real time, also known as a Dynamic Form. In this short video, we walk you through the basic features of the indoor lighting form including where to find it, how a dynamic form functions, how to sign and add the completed form to your plan set, and much more.
Video Walkthrough of the 2019 NRCC-LTO-E Dynamic Form
For the 2019 Energy Code cycle the Nonresidential Certificate of Compliance (NRCC) Forms have been simplified so there is only one NRCC per compliance category. In order to do so, each NRCC has been outfitted with dynamic features that allow it to react to user input in real time, also known as a Dynamic Form. In this short video, we walk you through the basic features of the outdoor lighting form including where to find it, how a dynamic form functions, how to sign and add the completed form to your plan set, and much more.
Video Walkthrough of the 2019 NRCC-LTS-E Dynamic Form
For the 2019 Energy Code cycle the Nonresidential Certificate of Compliance (NRCC) Forms have been simplified so there is only one NRCC per compliance category. In order to do so, each NRCC has been outfitted with dynamic features that allow it to react to user input in real time, also known as a Dynamic Form. In this short video, we walk you through the basic features of the sign lighting form including where to find it, how a dynamic form functions, how to sign and add the completed form to your plan set, and much more.
Video Walkthrough of the 2019 NRCC-MCH-E Dynamic Form
For the 2019 Energy Code cycle the Nonresidential Certificate of Compliance (NRCC) Forms have been simplified so there is only one NRCC per compliance category. In order to do so, each NRCC has been outfitted with dynamic features that allow it to react to user input in real time, also known as a Dynamic Form. In this short video, we walk you through the basic features of the mechanical form including where to find it, how a dynamic form functions, how to sign and add the completed form to your plan set, and much more.
Video Walkthrough of the 2019 NRCC-PLB-E Dynamic Form
For the 2019 Energy Code cycle the Nonresidential Certificate of Compliance (NRCC) Forms have been simplified so there is only one NRCC per compliance category. In order to do so, each NRCC has been outfitted with dynamic features that allow it to react to user input in real time, also known as a Dynamic Form. In this short video, we walk you through the basic features of the plumbing form including where to find it, how a dynamic form functions, how to sign and add the completed form to your plan set, and much more
Video Walkthrough of the 2019 NRCC-PRC-E Dynamic Form
For the 2019 Energy Code cycle the Nonresidential Certificate of Compliance (NRCC) Forms have been simplified so there is only one NRCC per compliance category. In order to do so, each NRCC has been outfitted with dynamic features that allow it to react to user input in real time, also known as a Dynamic Form. In this short video, we walk you through the basic features of the process systems form including where to find it, how a dynamic form functions, how to sign and add the completed form to your plan set, and much more.
Video Walkthrough of the 2019 NRCC-SRA-E Dynamic Form
For the 2019 Energy Code cycle the Nonresidential Certificate of Compliance (NRCC) Forms have been simplified so there is only one NRCC per compliance category. In order to do so, each NRCC has been outfitted with dynamic features that allow it to react to user input in real time, also known as a Dynamic Form. In this short video, we walk you through the basic features of the solar-ready form including where to find it, how a dynamic form functions, how to sign and add the completed form to your plan set, and much more.
